Carlingtech switch series Contura – absolutely water-and dust-proof button for unlimited indoor and outdoor use. These switches are used worldwide by leading shipyards for serial production. Switching power: 12 V/20 A, 24 V/10 A.
Available with or without LED lights (the LEDs are suitable for 12 and 24 volt operation). The 2-pole switch/button is suitable for reversing (right/left-rotation) of motors, fans, hydraulic systems, etc. Depending on the circuit, the LEDs can be used as backlight/night light or status signal. The LEDs are supplied in green. The connection is made via standard 6.3-mm connectors or with a terminal block (including 8 pieces of flat plug), available as an optional accessory .
Cut out dimension: 21.08 x 36.83 mm.
Note:
- The button comes supplied without a rocker. Switch rockers from the CONTURA II and CONTURA V Series are optionally available.
- The button with LED can be used variably, seeing as the LED doesn't have an internal connection to the switch's contacts. It can be controlled neutrally via connections: 8 (POS 12V) and 7 (NEG electrical system). This way, the LED can be used as either a control indicator or a dashboard light.
- Important: The button functions in both 12V and 24V systems, however the LED is designed for 12V operation. In order to use the LED in a 24V system, an additional series resistor is required (approx. 600 Ohms/2 W).
- A terminal block is separately available for the buttons with item numbers 20622, 20623 and 20624