Wire Rope Customisation
Wire rope configurator from SVB
Would you like to order customised stainless steel wire rope? Then you’re in good hands with SVB. Whether for maritime applications, interior and exterior design or creative projects – we provide you with the right solution in the best quality – made in Germany.
You will be pleasantly surprised by the wide range of applications for wire rope. It can not only tension sails and mount sun canopies, but also replace traditional stair railings and support climbing plants.
It’s really simple: customise your stainless steel wire rope in just 4 steps. Put together your desired wire rope design in just a few clicks – we’ll take care of the rest. Our SVB technicians are naturally available to assist you with any special requests or technical questions you may have.
Try the Wire Rope Configurator now
It's so easy to use
Step 1: Select wire rope and start configurator.
Choose your favourite for your project from top brands and all designs or materials. Diameter, swaging and crimping can be configured directly on the product. Even with a mobile phone, tablet or laptop, adding a swage or crimp is easy.
Step 2: Configure first end fitting.
Personalise first end fitting entirely as you wish. Choose from turnbuckle fork terminals, threaded terminals, T-terminals, hook terminals or open ends and customise to suit your individual requirements. You can see what you have selected instantly in the graphic preview. Satisfied? On we go!
Step 3: Configure second end fitting.
Now add the crimp or swage fitting for the other end and set the length. The preview shows all changes in real time. Don’t forget the final length - and the configuration is complete.
Step 4: Add your customised wire rope to your shopping basket and order.
Edit or remove the fitting if necessary. Happy with your configuration? Then add to shopping basket now. Here, too, you can see all the details of your wire rope and edit or duplicate them again. Then order - we’ll take care of the rest!
Order customised wire ropes in 4 easy steps
Wire rope custom-made in the highest European quality
From consultation to the finished product, whether you need fully custom shrouds, stays, lifeline wires, or other wire rope constructions, the SVB Wire Rope Configurator allows you to create wire ropes in just 4 simple steps — faster and more clearly than ever before.
In our SVB production facility, we manufacture professional wire rope products of the highest European quality for a wide range of applications. Now you can easily design individual swaging and crimping for your custom-made wire ropes – with our user-friendly wire rope configurator.
Please note that we cannot work with any pre-used materials or materials provided by you. In addition, this item is a custom-made product that cannot be exchanged
The SVB holiday service: we deliver directly on board
Is your standing or running rigging on board damaged, leaving you unable to continue sailing? With the SVB Holiday Service, we deliver custom-made wire ropes directly to your harbor and your boat – quickly configured, quickly delivered.
To complete your rigging, we supply the right fittings for every application – the materials used are without exception high-quality products from renowned manufacturers. Our range is rounded out by modern, innovative products that you can select for configuration. Say goodbye to your loose rigging!
Made in Europe since 1999 – more than 25 years!
At SVB, you’re not just buying wire ropes, you’re buying safety for your sailing boat. Take a look behind the scenes of the SVB wire rope factory and gain a detailed insight into the finishing of wire ropes. We know all about wire ropes: we have been manufacturing them for decades. With more than 25 years of experience in rig completion, SVB supplies the right running and standing rigging for every application, manufactured from the best products from renowned manufacturers.
Of course, all products from our product range can be selected for your customised order – you can also configure modern and innovative products directly on the product page. The production of customised stainless steel cable is always tailored to your requirements – we place special emphasis on individuality, durability, and flexibility in all fittings.
We only use high-quality products made in Europe for our custom-made items. Every product is selected for you according to the highest standards, by sailors for sailors, based on years of experience.
What you can do with custom-made wire rope fittings
More than just custom-made stays and shrouds: turn your projects into reality! With the new configurator from SVB, you can design wire rope products entirely according to your requirements. Wire rope is suitable for the manufacture of railings, sunroofs, antenna systems, standing and running rigging or can also be used to construct stair railings, canopies and guy wires.
This is how SVB customers rate their customised ropes
5 stars from Dieter H.
The man from the rigging always delivers good quality
5 stars from Armin B.
The team from the rigging department in Kiel was, as always, fast and good!
5 stars from Eduards S.
Used for railing
5 stars from Wilhelm R.
Product great, fast delivery.
5 stars from FABIO F.
Very satisfied with the product and SVB service.
4 stars from Roger A.
The wire is well made and (as it should be) flexible
Frequently asked questions about wire rope products (FAQs)
What kind of wire rope do you require?
‘You determine the application and select the swage and crimp - we take care of the rest.’
Many innovative ideas on board and ashore can be realised with help of our new SVB wire rope configurator. With our wire rope configurator, you can assemble your wire rope precisely to your specifications.
We can affix your wire rope with a wide range of fittings, such as terminals or thimbles. We swage 1x19 and 7x19 wires up to a thickness of 16 mm. Our wire ropes can also be used outside the marine sector, for example in the domestic sector.
We offer innovative design solutions for a wide range of applications. On board – for railings, sun sails, antenna systems, standing and running rigging. On land – for the construction of stair railings, canopies and rope structures, plant supports and load-bearing support cables.
Now you can easily have custom-made stainless steel cable made online! We custom-make every request with terminals and thimbles according to individual dimensions.
To allow proper tensioning of your wires, the wire ropes are supplied with the turnbuckles unscrewed by approximately two thirds.
Facts worth knowing about standing rigging and running rigging
Wire ropes are an integral part of a sailing boat. They take on tasks where conventional ropes would simply reach their limits. They can be thought of as the “steel skeleton” of a vessel.
To do this, you need properly manufactured, custom-made stainless steel on board:
1. Standing rigging: stability of the mast, correct shroud tension
2. Lifelines: safety on deck
3. Running rigging & steering lines: halyards, steering lines for the rudder system
In harbours around the world, we see a wide variety of rigging setups. Our technicians are often amazed that some of them are still standing at all: shrouds that are far too loose, masts leaning forward or bent to the side are a common sight. But it doesn’t have to be that way. For truly stable rigs, SVB offers expert technical advice from our technicians, our wire rope configurator, and a comprehensive range of products.
When do I need to replace wire rope on board?
When did you last inspect your rig?
Because pre-assembled wire ropes below deck often deteriorate unnoticed, regular and thorough inspections are crucial to prevent mast failure or material damage.
Visible damage is an immediate warning sign. We recommend inspecting the rig thoroughly at least once a year for wire breaks (commonly known as strand breaks or “meat hooks”). As soon as you discover the first cracks, its structural integrity is no longer guaranteed and replacement is imperative.
When to replace wires depends largely on how and where they are used. Insurers often recommend replacement after 10 years, although some experts advise waiting until at least 15 years or 25,000 nautical miles before changing.
Even if an old wire rope appears to be intact, it can conceal hidden dangers in its material structure. Over the years, stainless steel loses its elasticity. As a result, the rope can no longer cushion gusts or the hard impact of waves. These shock load peaks are transferred directly to the fittings, which can lead to sudden material failure.
Our tip: Considering how much damage a mast breakage could cause, the cost of a new wire rope assembly is low. Invest in your safety in good time.
Stainless steel constructions
Rigid, hardly any stretch for standing rigging (shrouds, stays and stays)
| SVB item number | Wire diameter | Breaking load |
|---|---|---|
| 11396 | 2,5 mm | 353 kg |
| 11397 | 3 mm | 755 kg |
| 11398 | 4 mm | 1346 kg |
| 11399 | 5 mm | 2100 kg |
| 11400 | 6 mm | 3027 kg |
| 11401 | 7 mm | 4119 kg |
| 11402 | 8 mm | 5302 kg |
| 11403 | 10 mm | 8035 kg |
| 11427 | 12 mm | 11186 kg |
| 11428 | 14 mm | 13362 kg |
Stainless steel constructions
Extra flexible for running lines (halyards and forerunners)
| SVB item number | Wire diameter | Breaking load |
|---|---|---|
| 11409 | 2,5 mm | 353 kg |
| 11410 | 3 mm | 478 kg |
| 11411 | 4 mm | 850 kg |
| 11412 | 5 mm | 1330 kg |
| 11413 | 6 mm | 1920 kg |
| 11414 | 8 mm | 3410 kg |
| 11415 | 10 mm | 5310 kg |
| 11507 | 12 mm | 7660 kg |
| 11508 | 14 mm | 10100 kg |
| 11509 | 16 mm | 13600 kg |
Guardrail wire
Stainless steel wire with PVC coating. Suitable for guy wires and railing constructions
| SVB item number | Name | Colour |
|---|---|---|
| 34171 | 3 mm (outside 5mm) | white |
| 27269 | 4 mm (outside 5 mm) | grey, transparent |
| 11416 | 4 mm (outside 6 mm) | white |
| 34169 | 4 mm (outside 6 mm) | black |
| 27270 | 5 mm (outside 7 mm) | grey, transparent |
| 11417 | 5 mm (outside 7 mm) | white |
| 34170 | 5 mm (outside 7 mm) | black |
Swages
Railing wire with PVC coating and fork terminal
| SVB item number | Crimping for wire Ø |
|---|---|
| 27550 | 2-3 mm |
| 27551 | 4-5 mm |
| 27552 | 6-7 mm |
| 27553 | 8 mm |
| 27554 | 10 mm |
| 27556 | 12 mm |
| 27557 | 14 mm |
| 27558 | 16 mm |
Crimps
7 x 19 wire incl. stainless steel/copper clamp, without thimble
| SVB item number | Crimping for wire Ø |
|---|---|
| 27540 | 2-4 mm |
| 27541 | 5-6 mm |
| 27542 | 7 mm |
| 27543 | 8 mm |
| 27544 | 10 mm |
| 27547 | 12 mm |
| 27548 | 14 mm |
| 27549 | 16 mm |
More on the topic of wire rope
Would you like to learn more about wire ropes and our custom-made products? Then take a look at our SVB Impulse guides on wire rope!
