Impeller Puller for 65-118 mm

The puller really did me a good job. Especially in my case, where the impeller is difficult to access, because the water pump is installed very close to an on-board wall, it has served me well. The puller immediately gripped the impeller (Johnson 1027, very similar to Volvo Penta 3862281), and a trace-free pulling was possible with very little effort, where screwdrivers etc. immediately failed. Simply insert and pull the puller between the slats, and then pull. Since there was not enough space for the threaded rod, I unscrewed it completely, attached the "torso" of the puller to the impeller and pulled the whole thing in the right direction with my fingers: This was immediately successful with minimal effort. The only drawback: The very high price for the tool, the height of which I can not understand with the best will.

Have I had no experience, the product was procured prophilactically, but seems to be of good quality

Unfortunately it is not suitable for my impeller because it has two fins on the extraction arms.