JABSCO WATER PUPPY Pump 2000 / 24 V

The WATER PUPPY circulation and bilge pump from Jabsco is ideal for professional use and continuous operation.

Characteristics

• Voltage: 24 V
• Output: 32 l/min
• Self-priming up to 1.2 m
• Connections:
  • Hose connection: 25 mm (1") (possible if you slip the hose over the entire connection and secure it with a hose clamp)
  • or 13 mm (1/2’) BSP internal thread
• Pressure: 0.4 bar
• Current consumption: 6 A
• Dimensions (L x W x H): 195 x 120 x 75 mm

The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.