LITE FLUSH II Marine Toilet / operation panel

Very good product, but the descriptions should be in German.

Installation does not work quite as promised, because the hose connections are somewhat differently attached and on board toilets but a little tighter is the position of the water inlet directly at the back of the toilet is not quite ideal. The function is however very good. Would next time choose with a hand switch

Things that aren't so great about it. Stoped working after just a couple of months... I need to activate mu Warranty. (

I installed the toilet last week and tested it today. The seal on the check valve could not be made tight. I used this afterwards with KENT HITAC because after five hours of trying (thank God with clear water ;-)) I was finally served. For this reason I devalued the product. The flange is only fixed there with two screws, which means that the check valve, which is also the seal, does not lie evenly and thus leaks. Since my drainage system first has to climb a slope into the holding tank, there is always some residual waste water in the waste water hose, which in this case also presses on the seal. This may not stand out or occur under better conditions - I found it very negative. Installation is not so easy under difficult space conditions because the screws for the base are difficult to reach. Otherwise, the toilet makes a good impression. The pump runs very quietly and pumping out works quite well. How it works in practice will prove to be the case.

unclear instruction booklet and insufficient for a good assembly