MASTERVOLT CombiMaster Inverter / Charger 12 V / 3000 VA / 100 A

Hallo Andrii, unfortunately your MASTERLINK MICC and the new CombiMaster no longer fit together. For the new CombiMaster there are several options for remote control and display function. You can work with components that communicate with each other via MasterBus or you can choose Czone components that you can also integrate into an NMEA 2000 network. MasterBus components are SmartRemote #65620# or EasyView 5 #65579#. CZone components are SmartRemote, CZone Touch 5 or CZone Touch 10. Important: SmartRemote can only work with one device, in this case the CombiMaster. To be quite clear: If you want to monitor or operate other MASTERVOLT components with a common display, e.g. a CombiMaster and a MPPT solar charge controller, this is not possible with SmartRemote. You would have to use the EasyView 5 or a CZone touch display. You ask for a suitable charge controller for 400 Wp + 200 Wp = 600 Wp (12 V) PV modules. So we have to assume a total current of about 35 amps. You could therefore use a MASTERVOLT SCM40 PWM (131824000) + optional temperature sensor (41500500 = cable length 5 m, 41500800 = 15 m) or a MASTERVOLT SCM60 MPPT-MB (131906000) + optional temperature sensor (see above). The PWM controller is not MasterBus or CZone compatible. The more effective MPPT controller is MasterBus compatible. We do not have MASTERVOLT solar components in our standard range, but we can get them for you without any problems. For further technical advice regarding solar regulators (other brands) or a quotation, please contact [email protected].