NAVICO Outboard Autopilot Set incl. PUMP-1 Hydraulic Pump / Precision 9 Compass

The new Lowrance Autopilot Kit is compatible with the High Definition Series (HDS) displays. It provides automatic steering for hydraulic-steer outboard motors. The kit includes the new version of the NAVICO PUMP-1 hydraulic pump.

The new Lowrance Autopilot Kit is compatible with the High Definition Series (HDS) displays. It provides automatic steering for hydraulic-steer outboard motors. The kit includes the new version of the NAVICO PUMP-1 hydraulic pump.

The Outboard Pilot, featuring SmartSteer™ control from your HDS Gen2 or Gen3, will conveniently steer to a heading, waypoint or route. This pack contains everything you need to fit an autopilot to your hydraulic-steer outboard motor, the autopilot lets you focus on fishing activity while keeping the boat on course! With the HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area. The Lowrance outboard autopilot is suitable for boats up to 30 feet (approx. 9 m) in length.

NOTE:
The NAC-1 Autopilot Computer is not compatible with B&G multifunction displays.

Features of the NAVICO Precision-9 compass
The Precision-9 Compass delivers accurate heading and rotation speed information to Simrad autopilots, radars and navigation systems via NMEA 2000®. The solid-state sensors continuously measure movement and course parameters via nine axes. In addition, the Precision-9 compass also provides information about heeling, rolling and pitching motions on compatible devices. An easily adjustable mounting bracket and connection via a single data cable allow installation on board almost every boat, including installation on the masts of boats with steel hulls.

Key Features

• Measures heading, rate of turn, heeling, roll and pitch via NMEA 2000®
• Accurate and reliable semiconductor sensor electronics
• Heading accuracy of ±2° after calibration
• Easily adjustable mounting bracket allows bulkhead or up-mast installation
• IPX7 waterproof to suit up-mast mounting on steel-hulled vessels
• Easy installation using one single NMEA 2000®-connection
• A compact sensor measures heading, rate of turn, heeling, roll and pitch
• Reliable solid-state sensor technology with no moving parts
• Easy and cost-effective installation
• Suitable for all hull types, including steel hull vessels, as can be installed on the mast.

NMEA 2000® heading and rate of turn information
The Simrad Precision-9 compass delivers heading, rate of turn, heel, roll and pitch information to connected devices such as autopilots, radars, sonars, multi-function displays and other navigation systems via NMEA 2000® output.

Solid-state sensor technology
The Precision 9 compass features a powerful solid-state sensor array based on MEMS technology. This highly precise sensor measures motion on on nine separate axes in order to calculate the most accurate information possible:heading, heel, trim, roll, pitch, yaw, surge and sway. The Precision-9 uses these nine parameters to determine highly accurate heading and rate of turn information and avoids many common limits of conventional electronic fluxgate compasses, with a heading accuracy of +/- 2 degrees after calibration.

Mount almost anywhere
An easily adjustable mounting bracket allows the Precision-9 to be installed on any vessel, in almost any location The Precision-9 may also be mounted directly to any flat surface and, with an IPX7 waterproof rating, external up-mast installation is possible on steel hulled vessels to avoid magnetic interference. Installation is further facilitated by the NMEA 2000® connection, where power and data are transmitted via a single cable.
.

Included within the delivery contents:
Autopilot-Computer NAC-1
The brains behind your Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor.

Technical Data

Power supply	9-16 V DC
Load	140 mA + drive unit load
Performance	Drive: 8 A continuous / 16 A for 1 s
Operating temperature	-25 to +55 °C
Waterproof	IPX5
Weight:	0.6 kg

PUMP-1 Hydraulic Pump (new version)
0.8L reversible hydraulic pump.

Technical specifications

Operating voltage	Via a NAC-1 course computer (12V DC)
Max. current consumption:	11.5 amps at 52 bar / 750 psi
Typical current consumption:	5.5 amps at 10 bar / 150 psi
Suitable for boats up to:	10 metres
Hydraulic volume:	0.8 litres
Operating temperature range:	-15° C to +75° C
Dimensions:	155mm (L) x 100mm (W) x 85mm (H)
Weight:	2.2 kg
Max. operating pressure:	55 bar / 800 psi
Suitable for cylinders with a volume of:	100cm3 to 180cm3

Precision 9 Compass sensor
Provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed

Technical specifications

Power consumption	0.4 W
Power supply	12 V DC via NMEA2000
Weight:	1 kg
Dimensions	119 x 36 x 119 mm
Waterproof	Yes, to IPX7
Operating temperature	-25 °C to +65 °C
Storage temperature	-30 °C to +70 °C
Included in delivery	Compass, NMEA2000 T, 4.5 m NMEA2000 network cable

Auto/Standby Button
Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.

Technical specifications

Operating temperature	-25 to +55 °C
Waterproof	IPX5
Weight:	0,04 kg

Hydraulic Fitting Kit
Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.