PHILIPPI Tank Interface TIL#2 for Bavaria Waste Tank Sensor
SVB item number: 34829
Manufacturer no.: TIL2
The tank interface TIL#2 adapts the signal from the second Bavaria tank sensor if two holding tanks are installed on board your Bavaria yacht. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
Product data
- SVB item number 34829
- EAN 4250214609773
- Manufacturer no. TIL2
- Description Tank interface TIL#2 for Bavaria faeces tank sensor
Product details
The tank interface TIL#2 adapts the signal from the second Bavaria tank sensor if two holding tanks are installed on board your Bavaria yacht.
Note: The tank interface TIL#2 is only required in addition to the tank interface TIL if you have two waste tanks on board. Only suitable for tuft probes with 2-pin connection. Nur geeignet für die Büschelsonden mit 2-Pin-Anschluss.
Installation instructions:
The tank interface is connected to the BMT battery monitor, which is also installed in the Bavaria Refit Panel, via the LIN bus interface. This requires a 1-core cable with a cable cross-section of at least 1 mm² to a maximum of 1.5 mm².
The connection cable to the vehicle electrical system must be fused, or the cable can be laid parallel to that of the monitor.
Technical data:
Note: The tank interface TIL#2 is only required in addition to the tank interface TIL if you have two waste tanks on board. Only suitable for tuft probes with 2-pin connection. Nur geeignet für die Büschelsonden mit 2-Pin-Anschluss.
Installation instructions:
The tank interface is connected to the BMT battery monitor, which is also installed in the Bavaria Refit Panel, via the LIN bus interface. This requires a 1-core cable with a cable cross-section of at least 1 mm² to a maximum of 1.5 mm².
The connection cable to the vehicle electrical system must be fused, or the cable can be laid parallel to that of the monitor.
Technical data:
- Operating voltage: 10 - 32 V DC
- Power consumption: 10 mA
- Dimensions (WxHxD): 130 x 80 x 42 mm
Product safety
Customers ask customers
No questions asked yet. Be the first to ask a question!
Similar items
-21%
VICTRON
VE.Bus Cable
€20.21
from
€15.95
3 variants
VERATRON (VDO)
Push Button for VL Flex IBM Display
only
€28.95
4
MASTERVOLT
Plug for MLI Ultra Lithium Ion Battery / waterproof
only
€12.95
2
BLUE SEA
Petrol Tank Sensor for VSM 422
only
€159.95
1
BLUE SEA
Water/Wastewater and Diesel Tank Sensor for VSM 422
only
€173.95
23
-13%
SIMARINE
ST107 Tank Module
€103.47
only
€89.95
6
SIMARINE
Temperature Sensor
from
€9.50
2 variants
-6%
VICTRON
Temperature Sensor
€39.27
only
€36.95
28
SIMARINE
Data Extension Cable / 8 m
only
€15.95
21
-16%
VICTRON
VE.Can to NMEA2000 Micro-C Adapter Cable
€89.25
only
€74.95
36
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!