RONSTAN Orbit Blocks with becket and looptop are particularly lightweight in relation to their workload. They are secured with a Dyneema® SK 75 loop, which is flexible, secure, and easy to handle. A clip holds the loop on the block, even in the open position it remains firmly connected to the block on one side. A unique asymmetric bearing system reduces the tread on the active area of the washer. Thus, the friction is reduced to a minimum.
Cleaning and Maintenance of Blocks:
- Rinse blocks regularly and thoroughly with warm fresh water to remove salt and dirt (carefully assist with a soft brush if necessary).
- For heavier soiling: Soak the block in warm fresh water with a little dish soap and move the rollers (do not use harsh cleaners).
- Avoid pressure washers, as water and dirt can be forced into the bearing.
- Allow to dry thoroughly afterwards to prevent corrosion.
- Lubricate only when necessary and according to the manufacturer's instructions.
- Note: Many modern bearings are maintenance-free or self-lubricating – improper lubrication can impair their function.
- Disassemble only if explicitly instructed by the manufacturer, as not all blocks are designed for maintenance or disassembly.