RACOR SPIN-ON 230 Fuel Pre-filter and Water Separator / 30 microns

Compact fuel pre-filter with highly efficient fuel filtration system. The RACOR SPIN-ON filter is suitable for inboard engines. Flow rate: 114 l/h.
The filter separates water and fuel so that the water level can be checked at any time. The accumulated water can be drained via a valve. Fuel is collected in the transparent plastic bowl.
Simply mount the filter in an easily accessible place on the fuel line. The filter inlet should be as close as possible to the top edge of the tank.
Clean and straightforward maintenance! Simply replace the middle element to carry out filter maintenance. The filter head and plastic bowl remain in place.

Note: The pre-filter can be mounted on both the intake and the outlet side of the fuel pump. The filter system is suitable for diesel and petrol engines up to 150 HP.
''Micron'' is the unit of measurement used to determine the size of dirt particles in liquids that are filtered with a filter.

Technical Data

• Dimensions (HxWxD): 229 x 102 x 102 mm
• Weight (dry): 0.9 kg