RULE Bilge Pump 360/1380 l/h

Powerful bilge pump from RULE. The first choice for sailors and fishermen around the world. The pump is made of sturdy plastic and is ideal for smaller boats due to its lightweight and compact design. The inlet strainer of the pump can be removed very easily, allowing for fast and thorough cleaning. The check valve prevents backflow of water into the bilge. Due to its low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection.

Characteristics:

• Flow rate: 23 l / min
• Power supply: 12V
• Current consumption: 2.1 A
• Fuse: 4.0 A
• Cable length: 750 mm
• Hose connection: 19mm
• Dimensions: 64 x 74 x 99 mm
• CE / ISO 8849 certification

The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.