With a height of just 5.8 cm, the RULE LP900D bilge pump can fit into even the smallest of spaces. In order to operate the pump, a float switch or an operating panel is needed. Thanks to its 180° rotating hose connection, the pump can be effortlessly and universally installed.
The delivery contents contain four different hose connections: 3/4", 1", 1/8" with a straight hose connection and 3/4" with an angular hose connection.
- 12V / 4A
- Output: 3400 l/h
- Dimensions: 19.3 x 5.8 x 5.8 cm
Note:
The actual delivery rate of a bilge pump
may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.
Hose connection
19 mm
25 mm
28 mm
Hose connection
3/4"
1"
1 1/8"