SEATEC YACHTING 225 + HONDA 2.3 Dinghy Set / dark blue

Seatec YACHTING inflatable boats are perfect as tenders for smaller yachts, but can also be used for excursions and fishing trips. When packed up, these boats are very compact and they can even fit in to the boot of a small car. But the major strengths of these YACHTING tenders are their stability, comfort and safety on the water! Easy to handle, even with heavy loads and several people on board - these SEATEC boats offer safety and stability at all times. Whether powered by a motor or by rowing, the large diameter air chambers, in conjunction with the enhanced cone buoyancy tubes provide adequate buoyancy wherever you take them. The material used is extremely weather-resistant, abrasion-resistant, oil-, salt-water-, colour- and UV-resistant as well as ageing-resistant. The hull consists of 5-layer laminate PVC. The base fabric is extra strong (1100 dtex) and is coated on both sides. Note on the material: SEATEC YACHTING tenders are made from a special 5-layer PVC (polyvinyl chloride). The base is made of a synthetic fibre fabric reinforcement (polyester). The fabric has 1100, making it particularly strong. It is covered on the inside and outside with an adhesive layer which serves as a carrier for a double-sided PVC coating. This keeps the inflatable boat light and robust. The PVC used is specially developed for the production of inflatable boats and has been tried and tested for years. The thickness of the material is approx. 0.7 mm, the boat skin weighs approx. 850 g/m². Material comes from Germany. Maximum tensile strength is 2500 N / 5cm.