Displays of the VERATRON VL Flex NMEA2000 display (depending on the connected transducer)
- Engine data (tachometer, operating hours, cooling water temperature, boost pressure, oil temperature, oil pressure, gear oil temperature, gear oil pressure)
- Battery data (voltage, current, state of charge, battery temperature)
- Speed overground (SOG)
- Speed through the water (STW)
- Depth
- Time (via GPS)
- Fuel tank level
- Fresh water level
- Waste water level
- Trim position
- Rudder position
The VL Flex gauge has a 1.44" TFT display and can show analogue as well as digital data. The display supports a variety of configurations, such as engine speed, boat speed or level values, and can be set up in a single or dual layout. The display can be connected to an NMEA2000 network via the wiring harness. Analogue sensors and power supply connected via open stranded wires.
Configuration is quick and easy via smartphone using the "VL Flex Configurator" app (AppStore and Google Play). All you have to do is hold your smartphone near the display.
Integrated analog to NMEA2000 gateway
Thanks to the built-in gateway function, values measured at the analog inputs can be shared over the NMEA 2000 network, making the data visible to all devices in the NMEA2000 network.
Supported configurations
Drehzahlmesser, Amperemeter, Voltmeter, Batterieladung, Batteriezustand, Batterietemperatur, Batterieautonomie, Betriebsstunden, Speed Over Ground (SOG), Course Over Ground (COG), Geschwindigkeit durchs Wasser (STW), Tiefe, Uhr, Kraftstofffüllstand, Frischwasserfüllstand, Grauwasserfüllstand, Trimmung, Ruderlage, Kühlwassertemperatur, Ladedruck, Öldruck und Öltemperatur.
Installation
- Installation diameter:
- 48.1 mm (flush mount)
- 53 mm (mounting with spinlock)
- Suitable panel thickness:
- 1.5 - 3 mm (flush mount)
- 0.5 - 20 mm (mounting with spinlock)
Wiring
- Red = Battery 12/24 V
- Black = Earth
- Green/Red = Frequency sensor signal
- Yellow/Red = Resistance sensor signal
- Blue/White = LIN Bus
- Red/white = lighting day/night
Technical Data
| Display |
1.44" TFT colour display |
| Screen resolution |
125x125 px |
| Voltage |
8-32 V (12/24 V) |
| Power consumption (amps) |
50 mA @ max. illumination |
| Operating temperature |
-20 to +70 °C |
| Storage temperature |
-30 to +80° C |
| Analogue inputs |
Resistive: 0-400 Ω
Frequency: W, Ind, Hall, Generator |
| Digital inputs |
NMEA2000, LIN Bus |
| Wireless interface |
NFC |
| Diameter |
52 mm |
| Material |
Polycarbonate |
| Protection category |
IP67 |
| Colour |
Black |
| Included in delivery |
Display VL Flex, wiring harness, mounting spinlock and documents |
Operating voltage
12 V (via NMEA2000)