In-line fuse holder with protective cap for ATC or ATO blade-type fuses. When the cap is attached the fuse holder is protected against dust and water jets (IP55 standard). Supplied with cable (approx. 26 cm) that forms a ring from one side of the fuse holder to the other and must be cut through and stripped as required for the installation of cable lugs or (crimp) connectors. Fuse not included.
- Max. load capacity: 32 V DC / 30 A
- Connecting cable: AWG 12 or 3.3 mm², fine-wire, tinned wire
- Cable length: approx. 26 cm
- Temperature range: - 5° C to + 85° C
- Protection class: IP55
Installation note
Fuse holders are usually mounted as close as possible to the energy source, for example with a ring cable terminal directly to the positive pole of the battery. The wire leading from the the other half of the fuse holder is connected to the positive wire of the circuit to be protected using a suitable crimp cable lug.
Ring cable terminals and butts must be suitable for 2.5mm² to 6mm² wire size and are identifiable by their yellow colour.
Ring cable terminals: M4 (4 mm ring-inner-Ø) = SVB-# 63748, M5 = 63774, M6 = 63737, M8 = 63738, M10 = 63758.
Butt connector = 63732.
Suitable crimper = 51930.