Customer ratings

Seawater Filter / max. 130 l/min

co. P.
by co. P. Flag of Austria 6/18/2012
the sealing ring is a little stupid
Martin J.
by Martin J. Flag of Germany 6/3/2011
The closure was to get tight only with a lot of pressure, the largest hose diameter of 19mm is my opinion too small. I had to raise in Greece with a lot of effort reducers, since the lines were designed for 25mm. The graduation should contain the diameter 25mm. Starting from an impeller pump, which normally has 25mm outlets. SVB: Buy one size bigger. The larger version comes with hose ø 19-25-32mm.
Martin J.
by Martin J. Flag of Germany 3/31/2011
The filter will be installed in Greece in April. After that I will comment if it is not too late. Martin Jenett
Rene B.
by Rene B. Flag of Denmark 6/12/2023 Verified purchase Variant: 11848
Dårlig O-ring
Meget dårlig konstruktion til lågets O-ring.
Næsten umulig at skruelåget på så det er tæt.
stefano P.
by stefano P. Flag of Italy 6/23/2015 Verified purchase Variant: 11848
it looks good, but I will not install it, it has the meshes of the water filter inside too wide allowing sand and other small debris to pass through.
Our answer
Gent.ssimo Cliente,

nel caso l\'articolo non risponda ai requisiti da Lei richiesti, può avvalersi del diritto di recesso (nel corso dei 14 giorni successivi alla consegna). Ci rinvii l\'articolo e riceverà il rimborso dell\'importo pagato. L\'articolo deve essere inviato nel suo imballo originale e non utilizzato.
Per maggiori informazioni, contatti il nostro servizio clienti al numero 06 94806238.
Saremo lieti di fornireLe tutte le informazioni di cui necessita.

Cordialmente

lo staff SVB
Anonymous
by Anonymous 10/27/2012
The O - ring will easily slip out of position when the filter is turned off. The skill filter from Vetus or Volvo better!
Philip F.
by Philip F. Flag of Germany 12/7/2011
Poor solution of the seal, the rubber ring is not fixed and slipped by the rotation of the lid. It takes several attempts until the ring is properly seated and the lid is properly closed.
Sylvain V.
by Sylvain V. Flag of France 5/14/2023 Verified purchase Variant: 11848
unusable
To rinse the cooling circuit of my engine I have a valve which allows me to send fresh water by opening the valve, the lid has jumped in the air, water everywhere !!!
I fired this thing immediately.
Reinhard M.
by Reinhard M. Flag of Thailand 6/5/2021 Verified purchase Variant: 11848
unusable
1. The groove for the O-ring is not deep enough 2. The diameter of the O-ring is too small. Due to 1 2, the O-ring CANNOT be inserted into the groove 3. The O-ring should seal against the cover . However, the lid has 4 sharp edges which will press into the O-ring and damage it. The O-ring seal design is really amazing. Now I have paid for the filter, replacement O-ring, replacement cover, for everything shipping and customs to Thailand, have packed the tool from the ksite and want to install the part and now I notice this faulty construction ...
carsten W.
by carsten W. Flag of Germany 9/25/2015 Verified purchase Variant: 11848
Thin plastic. Lid sticks easily, thread must be kept very clean if necessary with silicone spray. Filter screen very coarse!. So far no practical testing.
Ulrich L.
by Ulrich L. Flag of Germany 9/26/2012
after 6 months broken exchange without problems u. fast
E-mail Newsletter

Product news, offers & new guide videos. Stay up to date!

WhatsApp

New: Get news from SVB straight to your phone!