Customer ratings

Long-term assessment is still pending ...

The cable screw cap on the bottom of the lamp is not specially sealed.

Unfortunately, my anchor light isn't waterproof; water penetrates through the cable gland. After opening it, you can see that the gland is too large, incorrectly installed, or the cable is too thin.
The solution was to shrink a piece of heat-shrink tubing with adhesive (important) over the connecting cable; now it's sealed for now.
Due to the SMD technology, it's naturally very susceptible to water. It's best to also coat the circuit board with a protective coating; I'll do that as soon as I have it.
Otherwise, it's a practical lamp that I'd like to use for a long time.
My tip: check the cable gland; otherwise, it might only be suitable for one-time use.

Haven't been able to test the lamp yet

The positive and negative leads in the cigarette lighter plug are not insulated and are soldered to the positive and negative poles at a distance of only a few millimeters from each other! Follow short circuit! In addition, condensation in the lamp housing after only a short period of use! Irresponsible and cheeky to sell something like that!

c is my third