Customer ratings

It's just a standard clamp - I would always use it twice.

Product is necessary for the sewage tank installation and hopefully fulfills its task.

Produkt ist notwendig für den Fäkalientankeinbau und erfüllt hoffentlich seine Aufgabe.

The clamps are OK, but the screw simply spins if the load is too high. I would like it if SVB also had clamps with a higher load capacity but the same thickness in its range. \r\n

It's unclear why I should install these hose clamps on the Webasto heat pipes; they damage them and are extremely expensive.

Cable ties, on the other hand, are extremely good and durable.

A clear recommendation against these hose clamps and in favor of cable ties.

I bought the stainless steel hose clamps, the blue drinking water hose, the DOMETIC plastic hose connectors and the MAESTRINI hose nozzles AG, brass from SVB. After commissioning, water immediately sprayed out of all the connections. I then fitted an old hose clamp from the hardware store to one connection - it was completely leak-proof!!! The hose clamps are specified for a hose thickness of 16 - 27mm. The drinking water hose is 21mm and one suction hose is 25mm. The stainless steel clamps are much too hard and deform very unevenly when tightened. As a result, the hose is not pressed evenly around the nozzle. Conclusion: The hose clamps are completely unsuitable for drinking water hoses. I am now getting cheap, flexible hose clamps from the hardware store that work.

bought 4x of these clips - 1 failed when i torqued it up with hand screwdriver which was disappointing as i had little pressure applied...now im not sure do i need to change the other 3x i installed or was it just 1 faulty clip i received

Unsuitable for heavy work

Not suitable for hard work