Katharina S

Hi Helmut, We have installed a new latch stopper at this point. In our case (Bav42 2006), a stainless steel plate was installed there as reinforcement. There were threads cut into it for the screws of the original trap stopper. We installed a different model and found the original solution quite good and cut new threads into it. But you can probably also bolt through. Kind regards Katharina

Cool, thanks!

Yes, exactly these windows.

Many thanks for the instructions. We had already tried it with lots of soapy water. But we'll try our luck again tomorrow with silicone grease!

Hello dear Bavaria 42 Cruiser owners, We have just removed our Lewmar Captive windows (the two non-openable ones in the saloon) to replace the seal between the window and the frame. We bought these seals #30739# for this purpose. They also look like the ones that were originally installed. The seals fit the windows. Unfortunately, we can't get the window and seal into the frame. There is about 1 cm missing on one side. Has anyone worked on these windows before and has any tips on how to get them back together? Alternatively, we would also be prepared to seal the windows in some other way, if anyone here has any experience, we would be grateful for that too! Many thanks and best regards Katharina