Thomas T

Hi Alex, perhaps a few questions/statements that might help you to narrow things down: Both tanks: Is the water really coming OUT of the tank or is it perhaps rain or sea water (taste test)? Bow: Is it really coming from the inside, or have you, for example, modified something on the anchor locker so that rainwater or the wet anchor chain is now running in (this was the case with me)? Have you drained the front tank and checked whether water is still coming in? If it's actually coming out of the tank, it's quite a solid PVC tank. A lot has to happen before it gets a hole and water runs out of it. I would simply remove the connection, clean it and reinsert it with a new seal. Rear: You mean the lid on top? Here too: have you ever left the tank empty, did no more water come out? Workaround: Don't fill the rear tank completely, then it should be better. You could also wrap Teflon tape around the thread, that could also help, water should only run out through heeling if the tank is not full. I hope I was able to make a helpful contribution! Thomas!

Where should it be? You need a local sailmaker, it won't work off the shelf, I think, if there is such a thing...

Hi Jarmo, I have a 3-blade folding propeller fitted, I can find out the size for you in the spring and let you know. Greetings Tom

Hi Volker, please send an e-mail with your Whatsapp phone number to [email protected] and you will receive an e-mail or Whatsapp message with an attachment...

Hi Volker, ours comes from Heikendorf (near Kiel) from Oleu. greetings - Thomas

k, that is of course also a number. I assume with a length of 2m (from the mast) the anchor locker would also be free, right?

Hi Jarmo, how long is the inflatable boat in the photo?