Wolfgang S

A really excellent primer!

The tub is made of very cheap, thin, and overly hard plastic. It was already broken in the packaging! The roller and holder are fine.

For those unfamiliar with foam rollers, the free end will start to peel off after a while. Change the roller at the slightest visible tear, otherwise you'll end up with foam fibers mixed into the paint. This means you should order enough rollers depending on the area you're painting. By the way, there are 10 rollers in each resealable package.

Tip for the yield of the first coat on old antifouling: calculate approximately 15-20% more!

After applying three coats of antifouling paint (at the boatyard in Spain, with daytime temperatures up to 29°C), I removed my masking tape. Unfortunately, often only the paper comes off; the adhesive remains on the boat! Now I have the choice of 1) leaving a mudguard strip above my fresh antifouling paint, or 2) trying to remove it with thinner, which will of course remove some of the antifouling paint and smear it onto the boat. A very disappointing product; I expect better from the brand-name manufacturer 3M! My neighbor at the boatyard said that the light-colored masking tape should be removed after two days at the latest, or that the blue masking tape should be used.

My ENO stove is from 2013 and the burner caps were very rusty. The middle burner had the worst flame. After cleaning the burner pot and fitting this new cap, the flame pattern is perfect again and the ignition is very good.

Suitable for use with an ENO stove from 2013 with burnt knobs (due to various charter crews)

Good replacement for a broken original part (Suzuki 2.5 hp)