2 times in use on a Hallberg-Rassy Varv AB Monsun 31
Used on a Bavaria 340 Caribic
Used on a Bavaria 40 Vision
Used on a Sun Odyssey 32.2
Used on a Sunbeam 30
Used on a Oceanis Clipper 523
Is in one shopping basket right now, grab yours now!
The SAHARA Mk2 automatic bilge pump has a built-in float switch and is easy to install and service. It features a patented impeller that eliminates air-locks in the system, so that the pump will not run dry and burn out. It also has an integrated non-return check valve to prevent water from running back into the bilge. Suitable for fresh and salt water. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings.
Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP
address. Please also check your browser for updates.
The SAHARA Mk2 automatic bilge pump has a built-in float switch and is easy to install and service. It features a patented impeller that eliminates air-locks in the system, so that the pump will not run dry and burn out. It also has an integrated non-return check valve to prevent water from running back into the bilge. Suitable for fresh and salt water.
Integrated float switch
The built-in float switch activates the pump when water reaches a height of 50 m and deactivates at a height of 19 mm.
Flexible installation possibilities
The design also features a mounting hole pattern that allows for the most flexible installation options. This makes it easy to replace any top bilge pump in its category (e.g. Johnson Ultima, Johnson Float, Rulemate or Shoreline), without having to drill new holes.
Easy and quick to service
The pump has been innovatively designed for simple system maintenance. There's no need to dismantle the plumbing or mounting feet. If necessary, the basket can be removed by a click lock and the pump can be inspected and cleaned.
Note:
The actual delivery rate of a bilge pump maydeviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.
Features
Discover the features that make this product stand out. From technical details to special
functions – we’ve summarized all the key information for you.
by
Timo K.
8/19/2022
Verified purchase
Variant:
76533
SAHARA Mk2 1200
It is one of my 3 automatic bilge pumps, a replacement for the non functioning one. As the bilge is empty I just can't tell anything about noise and flow rate. I have chosen this because of it's size and described functionality what comes to its maintenance and installation.