Compact bilge pumps switchboard with integrated fuse and audible / visual alarm. Switching options "Automatic mode - Off - Manual operation." In "Manual mode", the bilge pump is operated with a pushbutton. After releasing the pushbutton, the switch is set back to "Off". The switchboard features 2 status LEDs for power (green) and alarm (red) and a loud audible piezo sounder. Made from ABS plastic. Comes with 15 A fine-wire fuse (6x32 mm).
Outer dimensions: (L x W): 115 x 63 mm, panel thickness 17 mm
Mounting dimensions: mounting depth 45 mm, required installation opening 90 x 53 mm, operating voltage 12 V (6-15 V)
Important notes:
- the existing bilge switch must be in the plus-line of the bilge pump.
- For the alarm function, a second bilge switch is required. This is to be installed a little above the first bilge switch.
- Bilge Switch 1 controls the automatic pumping without an alarm. If bilge switch 1 has failed or the intrusion of water is too large, bilge switch 2 activates the pump and simultaneously activates the alarms.