COLOMBO LED Light, plastic

The LED light COLOMBO is equipped with white and red LEDs. It has an extremely low power consumption. Switch: on / off / on – you can switch the white and red LEDs separately. Bulbs included.

Installation instructions

To install the light, the "lens" must first be removed. You will need a small, slotted screwdriver to do this. The lens is attached to the light housing via a snap-in lock. Take care when handling! There are 3 small slots on the edge of the lens, each 120° apart from the other. To open, carefully insert the small screwdriver into one of the slots, raise the "glass" slightly and then remove it completely.

Replace the lens in reverse order. Make sure that the 3 snap hooks are positioned above the 3 locking catches on the housing and push the "glass" onto the base until it is locked again in all 3 positions.