DIGITAL YACHT TriNav GPS160 Antenna / NMEA0183

The TriNav GPS160 Digital Yacht antenna features a powerful positioning sensor that uses GPS, Glonass and the new Galileo satellite system. This enables the antenna to determine an incredibly precise location with an accuracy of less than one meter, depending on reception strength. Position data can be output with an update rate of 1, 10 or 18hz.

As well as using all satellite systems (TriNav), the antenna can also be programmed to use only one positioning system such as GPS or solely Galileo. Furthermore, the speed at which the data is output (baud rate) can be easily set to 4800, 38400 or 115200 baud using internal DIP switches.

The antenna can be mounted directly or on a 1" x 14TPI thread holder.


Technical specifications

Operating voltage:	10-30V DC
Current consumption:	<20mA at 12V DC
Supported satellite systems:	GPS, Glonass and Galileo GNSS
Data output:	NMEA0183 version 2.3 and 4.1 4800, 38400 or 115200 construction rate (adjustable via DIP switch)
Sent NMEA0183 data sets:	DTM / GBS / GNS / GRS / GSA / GST / GSV / RMC / VLW / GLL / GGA / VTG / ZDA - depending on the satellite system set
Mounting options:	Surface mounting (3x integrated M3 threaded sleeves) Mounting on optional 1 "x 14TPI thread holder
Cable length:	10m
Weight:	310g
Dimensions:	75mm (diameter) 82.5mm (height including foot) 34.9mm (height without foot)

Note
To set the baud rate or the satellite system using the DIP switches, the antenna must be opened. Please open the antenna with the greatest care and, if you have any questions, contact a service technician. Physical damage to the circuit board is not covered by the warranty.