The powerful FLOW MASTER 5.0 is a five-chamber displacement diaphragm pump with a digital controller that automatically adjusts the water flow, ensuring an even water flow at the same time. By varying the speed, the pump can be installed without an accumulator tank.
In addition, the innovative, variable flow option of the Aqua Jet FLOW MASTER WPS 5.0 ensures an improved flow rate with virtually silent operation and lower power consumption.
Key features
- Variable speed
- Quiet operation
- Smooth flowing
- Self-priming
- Digital control switch automatically turns the pump on and off when the tap is opened and closed
- Dry running without damage
- Low power consumption
- Quick disconnect fittings
Operating principle
If water is used (e.g. at the tap, shower), the pressure is reduced. In the event of a slight pressure drop (below 50 PSI), the built-in digital control switch activates automatically and gently switches the pump on to maintain the required pressure. If more water is required, the control switch registers a drop in pressure and automatically increases the motor speed to increase the flow volume. If the consumption drops, the switch reduces the motor circuit until a pressure of 50 PSI is reached. The pump then switches off automatically when the pressure is reached. Thanks to its robust construction and sophisticated design, the Flow Master 5.0 is built to last for many years of operation.
Technical specifications
- Voltage: 24 V
- Flow rate: 19 l/min
- Motor: WPS 5.0 - 150 W (with built-in overheating protection switch)
- Connections:
- 3/8‘ BSP thread, 1/2’ hose (Ø 13 mm)
- 1/2‘ BSP thread, 3/4’ hose (Ø 18 mm)
- Max. suction lift: 2.5 m
- Max. liquid temperature: Max + 50 ° C
- Cut-off pressure: 3.5 bar / 50 PSI
- Connection cable: approx. 1 m
- Material:
- Housing: Nylon/polypropylene
- Valves: Santoprene/EPDM
- Membrane: Santoprene
Integrated pressure switch