JOHNSON PUMP L2200 Bilge Pump / 12 V / 7800 l/h

Max. flow rate: 130 l / min

To product

At a glance!

12 V

Float switch: Optional

customers like: Flow Rate

customers like: Noise Level

by Wolfram H.

Super construction with attached float switch. I have used 3 of these pumps in my previous boat since 2002 with absolute reliability.

Fits precisely into the existing mounted suction screen. (Bj.2003) It was a replacement delivery, for a defective !! Thus no assembly effort, only with Chlips stuck ... perfect!

by Feuerschutz G.

Besser geht nicht.

The pump and the float switch make a solid impression and could be installed without any problems. Practice will now show whether it will work in the long term.

by Lothar R.

top service ,gerne immer wieder

by Peter B.

Product data

SVB item number 46313
EAN 7330717000349
Manufacturer no. 32-2200-01
Operating voltage 12 V
Recommended fuse 12 A
Max. flow rate 130 l/min
Max. flow rate 2200 gph
Operation Manual
Float switch Optional
Hose connection 32, 28 mm
Hose connection 1 1/4", 1 1/8"
Ø 108 mm
Height 177 mm
Weight 2.25 kg
Type L2200

SVB recommends

-11%

JOHNSON PUMP ULTIMA SWITCH Electronic Float Switch

only €59.95

Accessories

PVC Fabric Hose

from €2.50

7 Versions

Spiral Reinforced Suction Hoses

from €4.40

4 Versions

-21%

Heavy-Duty Stainless Steel Hose Clamps

from €5.00

24 Versions

Steel Wire Reinforced PVC Hose

from €3.95

8 Versions

-24%

Stainless Steel Hose Clamps

from €2.10

18 Versions

-7%

JOHNSON PUMP AS888 Float Switch

only €39.95

-15%

JOHNSON PUMP BILGE ALERT High Water Alarm with Ultima Switch

from €109.95

2 Versions

-7%

JOHNSON PUMP Control Switch for Bilge Pumps

from €51.95

2 Versions

Product details

Submersible pumps for use in bilges. The improved engine and rigid thermoplastic housing ensure a long service life for the pump. A float switch is available separately.

Dimensions in idle position (L x W x H) 116 mm x 75 mm (mounting plate) / 68 mm (floating device) x 66 mm, mounting plate 75 mm x 37 mm, hole spacing 64mm, required drilling-Ø 5.5mm, cable length around 750 mm.

Note:

The actual delivery rate of a bilge pump may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.

Operating voltage

12 V

130 l/min

Float switch

Optional

Hose connection

32 mm 28 mm

Hose connection

1 1/4" 1 1/8"

Documents

Manual

PDF (869,14 KB)

Product safety

What other SVB customers have to say

100% real reviews

36 customer reviews

4.3 (out of 36 ratings)

5 Stars

(18)

4 Stars

(13)

3 Stars

(2)

2 Stars

(3)

1 Stars

(0)

Advantages
Flow Rate (4)
Noise Level (4)
Price/performance ratio (2)
Quality (2)
Mounting/Installation (4)
Weight (1)

Disadvantages
Price/performance ratio (1)
Quality (1)

by Leonardo C.

9/23/2023 Verified purchase Variant: 46313

I have one of the best pumps on the market, another one installed 4 years ago.

Advantages
Flow Rate
Noise Level
Price/performance ratio
Quality
Mounting/Installation

by Helmut R.

9/21/2022 Verified purchase Variant: 46313

Good product

bilge

Advantages
Flow Rate
Noise Level
Price/performance ratio
Quality
Mounting/Installation

by Sven F.

10/19/2021 Verified purchase Variant: 46314

Good advice

The product is good, does what it's supposed to. The advice was remarkable again. The pump ordered was not available and we took the time to select a replacement product. Really top advice and processing.

by Giuseppe F.

3/12/2019 Verified purchase Variant: 46313

Very good and operational

by Alexander R.

5/16/2018 Verified purchase Variant: 46313

L2200 Bilge Pump / 12 V / 7800 l/h

the optimum at a pump

View all ratings

Rate product

How would you rate this product?

Disappointed

Completely fails to meet my expectations

Poor

Only some expectations are met

Meets my basic expectations

Good

Slightly better than my general expectations

Excellent

Fully exceeds my expectations

Click on the stars to rate

Customers ask customers

Technical question

Gerbrand O. | Jul 12, 2026

The specifications mention 28 and 32mm hose connections. But I received hose connections for 25 and for 28.5mm. I had already installed a 32 mm hose etc. How do I attach a 32mm hose to the L2200 pump? Are there suitable hose connectors available? Or (not ideal) a 25 to 32mm hose adapter?

No answers yet. Be the first to answer this question!

Comparison

JOHNSON PUMP

JOHNSON PUMP

L2200 Bilge Pump / 24 V / 7800 l/h

Availability / Price

only €129 ⁹⁵

53 in stock

only €153 ⁹⁵