JOHNSON's Ultima 600GPH bilge pump features state-of-the-art microelectric fields that detect the presence of water in the ship's bilge area and automatically pump it out. The Ultima bilge pump is a sealed submersible pump and has an electronic float switch for easier installation.
Technical specifications
- Voltage: 12V
- Flow rate: 38 l / min
- Length: 142 mm
- Width: 82 mm
- Height 105 mm
- Hose size: 3/4"
- Material: ABS plastic
- Weight 0.66 kg
Note:
The actual delivery rate of a bilge pump
may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.