LIGHT PRIMER SPRAY 2-Part Epoxy Primer

View Ratings (72)

View Ratings (72) Questions (0)

LIGHT PRIMER SPRAY 2-Part Epoxy Primer Image 1 of 4

LIGHT PRIMER SPRAY 2-Part Epoxy Primer Image 2 of 4

LIGHT PRIMER SPRAY 2-Part Epoxy Primer Image 3 of 4

LIGHT PRIMER SPRAY 2-Part Epoxy Primer Image 4 of 4

2-component epoxy primer spray for areas below and above water. Suitable for use on GRP, metal, plywood and hardwood. Colour: cream. Product details

This product is no longer available. But a successive product is available:

Available variants

Successor

HEMPEL LIGHT PRIMER High Performance Two-Component Epoxy Primer

from €25.95

VAT inc., ex-works

(€70.14/ l)

To product

HEMPEL Prop Primer / light grey

only €23.95

VAT inc., ex-works

(€47.90/ l)

To product

by IGE D.

The expected

Read all product reviews

SVB recommends

3M Comfort Respirator Mask

only €38.95

VAT inc., ex-works

Accessories

-16%

Paint Roller for 1 part and 2 part paints / Antifouling and primer

only €6.95

VAT inc., ex-works

Product details

2-component epoxy primer spray for areas below and above water. Particularly recommended for maintenance, spot repair, touch-up and as a primer for small uncoated surface areas, as well as a barrier against water vapour penetration and on GRP for osmosis prevention and repair. Can also be used as a primer before antifouling application on propellers due to spray application. All surfaces must be clean, free of oil and dry. Contents: 310 ml. Colour tone: Cream.

Application
Shake can and remove the red button from the lid. Turn the spray can upside down and push the red button into the valve at the bottom. Turn upright and shake vigorously until agitator ball is heard. Continue shaking for a further two minutes. Spray upside down at the end of spraying to clean the nozzle.

Documents

Datasheet

PDF (94,36 KB)

Safety datasheet

PDF (197,49 KB)

Product safety

What other SVB customers have to say

100% real reviews

72 customer reviews

4.8 (out of 72 ratings)

5 Stars

(58)

4 Stars

(14)

3 Stars

(0)

2 Stars

(0)

1 Stars

(0)

100% recommend SVB

by Ingo D.

10/26/2022 Verified purchase Variant: 50156

Translated automatically
Show original text

Widely usable 2K color

I use the primer as a top coat to restore the gel coat above the water on my 46 year old 22 foot sailboat. I've used it to repair minor damage in the past, the color never really matched, so the whole ship has now been painted. The Light Primer is easy to work with. Good layer thicknesses can be achieved with just a few passes. If you let it set a little, the mass can also be filled with a spatula. It can be sanded just fine. The finish is matt and somewhat textured with the roller but can be polished to a high gloss if required. A final coating can thus be dispensed with.