The SHE348 digital battery management shunt is compatible with the BTM and BLS battery monitors from Philippi. These battery monitors are also installed in the Bavaria Refit panels. The shunt is installed in the negative line of the consumer battery. It is supplied with power via the voltage measurement line of the consumer battery.
Designed for continuous charging and discharging currents of max. 300 A and battery capacities of up to 1000 Ah.
Installation instructions:
The shunt is connected to the BMT battery monitor, which is also installed in the Bavaria Refit Panel, via the LIN bus interface. This requires a 1-core cable with a cable cross-section of at least 1 mm² to a maximum of 1.5 mm².
Technical data:
- Continuous load capacity: 300 A
- Short-term load capacity (1 min): 600 A
- Peak load capacity (0.5 sec): 1500 A
- Operating voltage: 8-40 V DC
- Measuring range: 10 mA - 1500 A
- Connection: M8 bolt
- Dimensions (LxWxH): 118 x 40 x 65 mm