RetroFit Kit / 12 V Bennett to Lenco Upgrade

This kit contains all of the components required to replace existing Bennett cylinders with LENCO's modern, electric cylinders. The special advantage of these cylinders lies in the simplicity of their installation: LENCO cylinders have the same hole spacing as Bennett cylinders. Therefore, new holes don't have to be drilled on the ship or on the Bennett trim tabs. Furthermore, LENCO cylinders can be connected directly to the existing cabling of the Bennett system. The kit contains two DEUTSCH-plugs for connection. Stroke length of the cylinder: 60 mm.
The delivery contents include: Two LENCO cylinders (12 V operating voltage), a connection cable (approx. 2 m), fixing screws, 2x DEUTSCH-plugs and an instruction manual in English.

Note: The RetroFit kit does not fit Bennet Sport Tabs.

Advantages

1. No new cables have to be installed and new holes don't have to be drilled into the boat or the Bennett trim tabs
2. The risk of environmental contamination is null, as LENCO cylinders operate completely on electricity, without oil
3. Maintenance of the hydraulic pumps is a thing of the past
4. Existing trim tabs can still be used