Powerful automatic bilge pump. The 27SA pump from RULE is made of sturdy plastic and features easily replaceable dirt filters. The integrated, electric float switch turns the pump on for one second every two and a half minutes to check whether water needs to be pumped or not.
Due to the unit's low consumption, the pump is extremely economical and is easy on your on-board battery. In addition, the pump has an automatic, thermal shutdown, which shuts off the pump immediately when overheating, ensuring additional protection. Voltage: 12 V. Power consumption: 3.7 A. Output: 70 l/min.
Note:
The actual delivery rate of a bilge pump
may deviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.