Having issues?
If you are not redirected to PayPal, it could be due to your browser settings.
Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP
address. Please also check your browser for updates.
The RULE LP900S low profile bilge pump has a height of only 5.8 cm, which allows it to fit into even the smallest corners. It has two different operating modes: In the first mode, the pump is automatically switched on at a water level of 5 cm or 3 cm (depending on the setting). In the second setting, the pump switches on automatically every 2 1/2 minutes to continually pump out any water from the bilge.
Extremely easy to install thanks to its 180° swivel hose connection. The package also includes four different sized hose nozzels: 3/4", 1" and 1 1/8" with straight hose connectors and a 3/4" with an angled hose connection.
12 V / 4 A
Performance: 3400 l / h
Dimensions: 23.5 x 5.8 x 5.8 cm
Note:
The actual delivery rate of a bilge pump maydeviate from the manufacturer's specifications, as it depends largely on the installation and power supply conditions. If the battery is fully charged, it will provide the necessary voltage to operate the pump at full power, but if the battery is only partially charged, the flow rate can be significantly reduced. The cable cross-section also plays an important role - if the supply lines are too long or too thin, voltage losses will occur, which will impair the performance of the pump. The hose diameter used also has an impact on efficiency: The larger the diameter, the lower the flow resistance and the better the actual delivery rate of the pump.
Features
Discover the features that make this product stand out. From technical details to special
functions – we’ve summarized all the key information for you.