SEATEC Electronic Dimmer / 12/24 V

This electronic dimmer is suitable for all LEDs. With three inputs and outputs to be able to control different light sources separately. Input voltage: 12-48VDC. Output power @12V: 72W per channel.

Function: a short push of the button switches the LEDs on or off, a long press increases the brightness and after releasing the button another long push will decrease the brightness again.

The dimmer can also be operated using a remote control with an output signal of 2.4 GHz. In addition to a dimming function for individual lights, the dimmer can also be used as a colour switch for RGB lights and as a CCT colour temperature control.

Note: this dimmer is not a voltage converter. The input voltage of the dimmer must be matched to the operating voltage of the LED.
We recommend using multi-voltage illuminants that are suitable for operation with 10 - 30 V DC.
When using 12 volt LED bulbs in the electrical system, an LED Feeder (DC / DC Converter) should be used for voltage stabilisation, since the voltage on board with active charging technology can reach almost 15 volts.


Technical Data:

Input voltage:	12 - 48 V DC
Output voltage	3 x 12-48 V DC
Output current	6 A, per output
output power	72-288W, per output
Dim range	0 - 100 %
PWM frequency	1000 HZ, standard
Operating temperature	-30 to +50 ° C
Max. housing temp	+85°C
Protection category	IP20
Dimensions (LxWxH):	174 x 45 x 27 mm
Protection:	Polarity protection, overheating protection, overload protection, short circuit protection