SEATEC Epoxy Resin

Perfect for minor repairs.

by Peter G.

by Uwe H.

Everything OK

Ideal for repair purposes

by Joachim L.

by Régis L.

No problem.

Product data

SVB item number 24204
EAN
Manufacturer no. 24204
Description SEATEC - Epoxy resin
Base Epoxy
Contents 0.5 kg
For substrate GRP, Wood, CFRP
Method of application Roller, Brush, Filler
Mixing ratio 100:60
Pot life 30 min
Curing time 8 h @ 20 °C
Fully cured 5 Days
Sandable Yes
with pump No
Shipping information Dangerous goods

SVB item number 26244
EAN 4260416460287
Manufacturer no. 26244
Description SEATEC - Epoxy resin
Base Epoxy
Contents 1 kg
For substrate GRP, Wood, CFRP
Method of application Roller, Brush, Filler
Mixing ratio 100:60
Pot life 30 min
Curing time 8 h @ 20 °C
Fully cured 5 Days
Sandable Yes
with pump No
Shipping information Dangerous goods

SVB item number 26245
EAN 4260416460294
Manufacturer no. 26245
Description SEATEC - Epoxy resin
Base Epoxy
Contents 5 kg
For substrate GRP, Wood, CFRP
Method of application Roller, Brush, Filler
Mixing ratio 100:60
Pot life 30 min
Curing time 8 h @ 20 °C
Fully cured 5 Days
Sandable Yes
with pump No
Shipping information Dangerous goods

SVB recommends

-14%

SEATEC Glass fabric 200 g

from €11.95

2 Versions

Accessories

-20%

Disposable Gloves / latex / 100 pcs.

only €19.95

Spatula Set

only €9.95

WEST SYSTEM Roller for Epoxy Resin and Polyester Resin

only €6.95

Product details

Unfilled, solvent-free epoxy resin for a versatile range of applications. The resin is suitable for lamination, gluing, filling or coating. It has excellent adhesion to many materials (GRP, wood, metal, polystyrene, concrete, etc.) and very good impregnation properties when used with glass fabric. If necessary, the resin can be used with suitable fillers as an adhesive or putty. After curing, both components form a high-strength, water-resistant bond or coating.

Processing Instructions: SEATEC epoxy resin is mixed in a ratio of 100:60 (by weight) or 100:70 (by volume). At the ideal processing temperature (20°C), the product has a pot life of approximately 30 minutes and reaches its final strength after three to five days. At temperatures below 10°C, both the pot life and curing time are extended, while the working time will shorten with larger mixtures due to exothermic heat. A curing treatment at 50°C for 24 hours increases strength and chemical resistance.
Mix the components accordingly and apply to the prepared substrate with a brush or roller. Sandblasted metals can be coated directly, while porous materials like wood or concrete should have a suitable primer applied.
Apply two coats to achieve a thickness of 300 - 400 µm. Second coat should be applied within 24 hours of the first. The epoxy resin is not free from yellowing under UV exposure. Therefore, a UV-resistant two-component paint should be applied as the final layer.

Documents

Safety datasheet

PDF (559,48 KB)

Product safety

Please note the following hazard warnings:

UN number

UN 2735, UN 3082

Transport class

Hazard pictograms

Signal word

Danger

Hazard warnings

Avoid breathing dust/fume/gas/mist/vapours/spray.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
Dispose of contents/container to …
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Collect spillage.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Keep out of reach of children.
Causes severe skin burns and eye damage.
Harmful if swallowed.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Toxic to aquatic life with long lasting effects.
Harmful to aquatic life with long lasting effects.

P261, P101, EUH208, P501, P305+P351+P338, P303+P361+P353, P391, P310, P280, P273, P102, H314, H302, H315, H317, H319, H411, H412

What other SVB customers have to say

100% real reviews

46 customer reviews

4.6 (out of 46 ratings)

5 Stars

(33)

4 Stars

(10)

3 Stars

(1)

2 Stars

(1)

1 Stars

(1)

100% recommend SVB

Advantages
Yield (theoretical) (2)
Price/performance ratio (2)
Processing (2)
Yield (3)
Use after treatment (3)
Drying time (2)

Disadvantages
Yield (theoretical) (1)
Price/performance ratio (1)
Drying time (1)

Customer images (1) from all reviews

by KIKE F.

3/13/2026 Verified purchase Variant: 26245 in use on a Dynamique - Dynamique 47

Very good product

Easy to apply and very durable

Advantages
Yield (theoretical)
Price/performance ratio
Processing
Yield
Use after treatment
Drying time

by Klemen K.

12/19/2025 Verified purchase Variant: 26244

Works every time

It cures find even at temperature around 10 C.

by Kay-Lars M.

4/24/2025 Verified purchase Variant: 24204

Top

Great, but the small containers are expensive.

Advantages
Yield
Use after treatment
Drying time

Disadvantages
Yield (theoretical)
Price/performance ratio

by Bucci E.

3/19/2025 Verified purchase Variant: 24204 in use on a Dehler Yachtbau GmbH - Dehler 34

Good product

Advantages
Yield (theoretical)
Price/performance ratio
Processing
Yield
Use after treatment

Disadvantages
Drying time

by Frank T.

2/26/2025 Verified purchase Variant: 24204