SUNWARE Cell Protector
SVB item number: 27427
Manufacturer no.: 63001000
The cell or hotspot protector prevents the cells in the module from overheating when the solar module is partially shaded. For this purpose, 2 bypass diodes are soldered onto the circuit board. A third diode works as reverse current protection.
Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 27427
- Manufacturer no. 63001000
- Description Cellprotector
Product details
The cell or hotspot protector prevents the cells in the module from overheating when the solar module is partially shaded. For this purpose, 2 bypass diodes are soldered onto the circuit board. (In conventional glass modules with aluminum frames, these bypass diodes are located inside of the junction box, on the back of the modules). In case of damage, the diodes can be easily replaced. These diodes are installed by SunWare, directly inside of the cell protector, rather than inside of the connection cap.
Inside of the cell protector, 2 bypass diodes have been integrated in order to prevent possible cell overheating. Reverse current protection has also been integrated. Since all SunWare solar controllers are equipped with reverse current protection, the cell protector's output "+" can be used here. For solar controllers without integrated backflow protection, select output "D +". This includes the reverse current protection diode.
1: Cell protector with circuit board
2: Connection type "Bypass": left: two cables to the charge controller, terminals "+", "-" (With this connection, the cells are protected from the "hotspot effect," through the use of 2 bypass diodes)
3: Connection type "Bypass + reverse current protection": left: two cables are connected to the charge controller terminals: "+ _D", "-" (With this connection, the cells are protected by 2 bypass diodes before the hotspot effect is protected by a blocking diode against reverse current within the module. Several modules can be operated in parallel, which helps prevent accidental damage to the modules)
4: Cell protector with housing, Dimensions: L 88 x W 35 x H 25 mm
Caution: Before using your solar module, ensure that the enclosed cell protector has been connected! The cell protector may not be damp or wet in any way. Each SunWare solar module must be connected to the cable end with the associated cell protector. Only after the cell protector has been connected, can the solar modules be connected in a series or in parallel.
Made in Germany!
All SunWare products are developed, tested and produced in Germany. The front cover of the modules are also made in Germany. By doing this, the high quality requirements of our products and materials can also be guaranteed.
Made in Germany!
All SunWare products are developed, tested and produced in Germany. The front cover of the modules are also made in Germany. By doing this, the high quality requirements of our products and materials can also be guaranteed.
Documents
Product safety
by
Panagiotis B.
10/3/2025
Verified purchase
10/3/2025
Verified purchase
by
ProLight G.
6/24/2024
Verified purchase
6/24/2024
Verified purchase
by
Reinhard W.
12/1/2020
Verified purchase
12/1/2020
Verified purchase
Customers ask customers
No questions asked yet. Be the first to ask a question!
Similar items
SEATEC
MC4 Solar Connection Cable / 4mm²
from
€24.95
2 variants
SEATEC
MC4 Solar Connection Cable / 6mm²
from
€29.95
2 variants
SEATEC
MC4 Solar Connection Cable Set / MC4 male-female to open ends / 1 metre
from
€8.95
2 variants
SEATEC
MC4 Solar Y-Connection Cable Set / 2-to-1 / 300 mm
only
€9.95
> 100
SEATEC
MC4 Solar Y- Adapter Set / 2-to-1
only
€7.95
> 100
SEATEC
MC4 Solar Connector Set / male/female / 4-6 mm²
only
€2.50
> 100
SEATEC
MC4 Solar Connector Set / male/female / 10 mm²
only
€2.95
> 100
SEATEC
Through-deck with MC4 Connector
only
€19.95
99
-21%
Z-mounting Kit for Solar Modules
€18.99
only
€14.95
13
SOLARFLEX®-X H1Z2Z2-K Solar Cable / black
from
€1.70
3 variants
Last seen products
-7%
Long Fender Key Ring
€6.39
only
€5.95
> 100
C-MAP
DISCOVER X - Extra Large
from
€219.95
8 variants
-13%
VOTRONIC
Temperature Sensor for Solar Controller
€22.90
only
€19.95
8
String of Flags
only
€79.95
4
-12%
ROCA
Wiper Control
€331.90
only
€291.95
3
Pirate Flags
from
€7.95
2 variants
-20%
Cheek Block
€21.15
only
€16.95
15
Flag - Lithuania
from
€5.50
6 variants
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!