Tiller Pilot ST2000 Plus incl. Smart Controller

I installed this driver but I have not yet been able to navigate with it. \ R \ nI have been very satisfied with the SVB service.

First successful test, works as expected.

I received this product with the rotating part (floating nut) of the 6-pin plug broken in three pieces, I want the photo I took at the reception, the package did not bear any trace of shock this non-vital piece can be changed by myself. I will call the commercial service tomorrow in France. A priori this piece was broken before packing. I hope at least receive a new take, otherwise I will adapt a catch with two commercial studs. At which email address can I send the photo of the broken part? or possibly send you the broken part? Thank you Concerning this pilot ST2000, it replaces the one which I had for 12 years and which worked correctly (about 300 hours a year). It broke down last autumn and considering his age I preferred to orient myself towards a new identical model. I intend to repair the old one to have a rescue pilot. note: fast delivery time and consistent with the telephone contact. Sincerely, Jean Pierre RAYMONDI 02 40 15 43 30

SVB is always professional, product arrived after 3 days from the order to 1/2 DHL. \ R \ nNot to object I would recommend to others use this online store

The tiller pilot ST 2000 Plus is completely sufficient for the use as I use the device. Since I am predominantly alone sailing the tiller pilot is not to think away when setting the sails and under the engine during doldrums. Even if I have to go below deck, I can rely on it to stay on course. Here, however, I take a ride out of the ship, so that in gusts of wind not too strong pressure on the system mechanics is exercised. Alone under sail and only at the starter battery, I would not let run the self-steering systems, because I can not estimate the power consumption yet. At least not for hours. The instructions are good, you just have to read and familiarize yourself. Important!! The tiller pilot has to be adjusted !!! 1. On which side is the system mounted? Bb.- or Stb.-side the device needs the info otherwise it will not work. 2. By default, the sensitivity is set to 4. I reduced this value to 3 to have less power consumption. But everyone has to adjust and try it out for themselves. All in all, a practical thing that helps to assist and ease the individual sailing maneuvers.