The Veratron LinkUp products convert analogue vessel and engine information into digital NMEA2000 data. This data can be displayed directly on an NMEA2000 compatible device. Configuration is quick and easy via smartphone. An LED indicates the status of the unit and that it is being configured. Power supply via NMEA2000. Approved for installation in the engine compartment according to ISO 8846:1990.
The resistance sensor allows the connection of a wide range of resistive transducers, such as level, temperature and pressure sensors. Optimised for a range of 0-400 ohms. The cable has a NEMA2000 connector on one end and a 2-pin waterproof AMP SuperSeal connector on the other.
The following data can be transmitted:
- Fuel level
- Fresh water level
- Waste water level
- Coolant temperature
- Oil temperature
- Oil pressure
- Trim position
- Trim tabs
- Rudder angle
Configuration
Configuration is quick and easy via smartphone using NFC data transfer. Start the app and configure your settings via the user-friendly interface. Sensor characteristic, sensor instance, alarm threshold and sensor type can be set. Simply hold your mobile device near the LinkUp to transmit your configuration. Thanks to the passive RF tag you can configure the device without power!
Technical specifications
| Power supply |
via NMEA2000 |
| Power consumption |
< 15 mA (Normal)
< 120 μA (Standby) |
| Input |
0-400 ohms |
| Output |
NMEA2000 |
| Waterproofing |
IPX 9K |
| Material |
PC-FR |
| Approval |
CE, Reach, RoHS |