VICTRON BlueSmart Charger IP 22 24 V / 16 A / 3 charging outputs

Highly efficient charger with an efficiency of up to 93% and very low power consumption when the battery is fully charged.
Thanks to the multi-stage charging algorithm, the battery is always supplied with exactly the right amount of energy that is needed. In addition, lithium-ion batteries are charged using a special algorithm.

Long-life, safe and quiet
Output current is reduced if the temperature rises above 60 °C, but the charger will not fail. You can also switch the charger to NIGHT or LOW mode. The maximum output current is reduced to 50% of the nominal value and the fan is switched off.

Recovery function for fully discharged batteries
The BlueSmart charger has a charging output that attempts to recharge even deeply discharged batteries. To do this, the charger will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.

Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The charger measures ambient temperature during the test phase and compensates for temperature during the charge process. Special settings are not needed.

Storage mode
Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger for more than 48 hours.

Integrated Bluetooth
With its integrated Bluetooth you can monitor the status of the charger and batteries with a smartphone or tablet. The charger can be configured and updated using the VictronConnect app.

Simple system with DC consumers only
The battery charger charges the battery and at the same time serves as a power supplier for the connected devices.
System with inverter
To ensure the supply of the 230 V AC source at all times, this system includes an inverter. For chargers with 3 outputs, several battery groups can be charged separately.
Technical Data

Input voltage range	180 - 265 V AC
charging current	16 A
Charging current, NIGHT or LOW	8 A
efficiency	94 %
No load power consumption	0.5 W
Frequency	45 - 65 Hz
Charging ports	3
Charge voltage 'absorption'	Normal: 28.8 V High: 29.4 V Li-Ion: 28.4 V
Charge voltage 'float'	Normal: 27.6 V High: 27.6 V Li-Ion: 27.0 V
Storage mode	Normal: 26.4 V High: 26.4 V Li-Ion: 27.0 V
Temperature range (operational)	-40 to +60°C
Material	Aluminium
Battery connection	Screw terminals 16 mm²
Protection category	IP22
Weight	1.3 kg
Dimensions (h x w x d)	235 x 108 x 65 mm