| Input voltage | 230 V AC |
| Charging current | 25 A |
| Efficiency | 94% |
| Standby power consumption | 0.5 W |
| Frequency | 45-65 Hz |
| Charging ports | 1 |
| Charge voltage 'absorption' | Normal: 14.4 V. High: 14.7 V Li-ion: 14.2 V |
| Charge voltage 'float' | Normal: 13.8 V High: 13.8 V. Li-ion: 13.5 V |
| Charge voltage 'storage' | Normal: 13.2 V High: 13.2 V Li-ion: 13.5 V |
| Operating temperature range | -30 to +50 ° C |
| Material | Aluminium |
| Battery terminal | Crocodile clips or M8 cable lugs |
| IP nominal value | IP65 |
| Weight | 1.9 kg |
| Dimensions (HxWxD) | 75 x 140 x 240 mm |
Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you.
I had this device working fine for a month. Now it no longer charges (or shows max 0.3A for a very short time). I have tried all settings, including the power source mode, to no help. Connecting via the app happens fine and no error messages are shown, and the device shows the voltage correctly. My pack is Lifepo4, 200Ah.
Hi Aleksi, you also sent us a request to [email protected] and tod us that you used four WINSTON 200 Ah LiFePO4 batteries, in sum 800 Ah! VICTRON recommends the charger for battery capacities between 80-250 Ah. You have probably overloaded the charger.
Hi, like I wrote, I have four cells (3,2V) in series = 200Ah 12V nominal voltage. Thus the load is completely within parameters. As an academical point, Lifepo4 has a much lower charge resistance than lead batteries, so a charger capable of charging 250Ah of lead should be strong enough for a bigger pack of lithium. However my setup is within the mentioned limits.
(And sorry, I did not mention in my e-mail earlier that the cells are 3,2V so the confusion comes from there).
Product news, offers & new guide videos. Stay up to date!
New: Get news from SVB straight to your phone!