VOTRONIC Solar Data Extender 3n1

The VOTRONIC Solar Data Extender 3n1 collects data from up to three VOTRONIC SR or MPP solar regulators so that they can be displayed on a single display such as LCD Solar Computer S. The Data Extender has three inputs and can be easily retrofitted to an existing solar system. Simply connect between your solar charge regulator and solar display using the modular cables included. 3n1 Data Extender can also be cascaded (connected in series) when more than 3 charge regulators are present. The Data Extender is powered by the charge regulator connected to socket IN1. Standby power consumption is very low, a negligible 0.7 mA, and only 10 mA in operation.
Using an additional VOTRONIC Bluetooth Connector S-BC, which is installed between the OUT socket and the display, all solar data can also be conveniently displayed on a smartphone via app.
Delivery contents:Solar Data Extender, 3 pcs. control cable 6-pin 0.5 m length, operating manual.

Suitable for the following devices:

• Bluetooth Connector S-BC (SVB-# 51218)
• LCD-Solar-Computer S (from serial no. 15V40.xxxxx) (SVB-# 24957)
• Solar charge regulator in SR and MPP technology (from serial no. 14Vxx.xxxxx)
• VPC series with solar function
• Battery Charger type VBCS Triple

Technical data

Nominal voltage	12 and 24 V
Operating voltage range	8 - 32 V
Current consumption	0.7 mA (Standby) 10 mA (active)
Dimensions (WxHxD)	75 x 47 x 24 mm
Weight:	37 g

Note
5 m modular extension cables are available on request. (Li655#2005)
As these are not warehouse stock, there may be a short delay in delivery.