SEATEC GTI 30 Thin-Film Antifouling / graphite
SVB item number: 66660
Manufacturer no.: 66660
Highly efficient PTFE-based thin film antifouling. Thin-film antifouling does not work by means of active ingredients that are emitted into the water, but by means of a very smooth surface, which makes it difficult for organisms to stick to. Colour: graphite. Product details
Recommended retail price:
€52.96
only
€39.95
(€53.26 / L)
-25%
You save: €13.01
Shipping information:
Dangerous goods
available
| in stock
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
At a glance!
Product data
- SVB item number 66660
- EAN 5035686055773
- Manufacturer no. 66660
- Description SEATEC - GTI 30
- Antifouling type Thin film antifouling
- Colour Grey
- Colour code Graphite
- Contents 0.75 l
- Area of application Salt water, Fresh water, Brackish water / Mixed operation
- Hull material GRP, Wood, Steel
- Method of application Roller, Spray gun
- No. of coats (recommended) 2 - 3
- Yield (theoretical) 9 m²
- Immersion after 3 h @ 15 °C
- Max. time before immersion 6 months
- For the Netherlands No
- For Denmark No
- Boat type Sailboat, Motorboat
- Existing coating SEATEC GTI 30, INTERNATIONAL VC Offshore EU, INTERNATIONAL VC 17m, AWN Dünnschicht Antifouling
- Typical shelf life 2 Years
- Shipping information Dangerous goods
Accessories
Product details
Note:
Use biocidal products with care. Always read the label and product information prior to use.
Use biocidal products with care. Always read the label and product information prior to use.
Highly efficient PTFE-based thin film antifouling. Thin-film antifouling does not work by means of active ingredients that are emitted into the water, but by means of a very smooth surface, which makes it difficult for organisms to stick to. The smooth surface is created with the addition of PTFE. The antifouling effect is also supported by the copper constituents incorporated in the binder. The extremely smooth surface ensures extremely low frictional resistance in the water and thus results in higher speeds and lower fuel consumption.
Highly suitable for North and Baltic Sea and for inland waters. Not for aluminium boats; steel boats must be primed with a 2-component product (at least 350 μm).
SEATEC GTI 30 contains a high proportion of metallic copper powder, is compatible with VC-17m and can be applied directly to existing old VC-17m coatings without further primers / adhesion promoters. SEATEC GTI 30 contains no chlorinated hydrocarbons. Yield approx. 12 m²/l with a dry film thickness of 10 μm. Colour: graphite.
Processing instructions SEATEC GTI 30 contains a high proportion of metallic copper powder, is compatible with VC-17m and can be applied directly to existing old VC-17m coatings without further primers / adhesion promoters. SEATEC GTI 30 contains no chlorinated hydrocarbons. Yield approx. 12 m²/l with a dry film thickness of 10 μm. Colour: graphite.
Mixing : Stir well before use. Pour the powder (located in the extra bag under the plastic lid) into the can. Stir or shake thoroughly. Once mixed, the product can be used for up to seven days provided it is stored with the lid closed and thoroughly stirred again before use.
GRP/blank gelcoat: Sand the gelcoat lightly and wet with a P240 grit. Wash the surface and let it dry. Then prime the surface with Epotec (osmosis protection). Then apply two coats of GTI30.
Steel/lead: Make sure the surface is clean, dry, dust-free and in a generally good condition. Then prime the surface with Epotec to protect the hull from corrosion. Then apply two coats of GTI30.
Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Then prime the surface with Epotec. Then apply two coats of GTI30.
Not suitable for use on aluminium or galvanised surfaces!
| Drying time | ||||
| Temperature | 5° C / 41° F | 15° C / 59° F | 23° C / 73° F | |
| Hand dry after | 60 minutes | 30 minutes | 20 minutes | |
| Launch after | 6 hours | 3 hours | 2 hours | |
| Overcoat interval | |
| Temperature | Time |
| 5° C / 41° F | 16 hours |
| 15° C / 59° F | 10 hours |
| 23° C / 73° F | 6 hours |
| 35° C / 95° F | 4 hours |
These antifoulings / paints may not be used in Holland.
Documents
Datasheet
PDF (122,33 KB)
Safety datasheet
PDF (169,65 KB)
Safety datasheet
PDF (142,30 KB)
Safety datasheet
PDF (181,61 KB)
Safety datasheet
PDF (154,17 KB)
Safety datasheet
PDF (179,64 KB)
Safety datasheet
PDF (152,05 KB)
Safety datasheet
PDF (175,04 KB)
Safety datasheet
PDF (147,54 KB)
Product safety
Please note the following hazard warnings:
Contains biocides
Yes
BAuA-No.
N-105422
UN number
UN 1263
Transport class
3
VOC content
560.2 g/l
Hazard pictograms
Signal word
Danger
Hazard warnings
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Remove contaminated clothing.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Do no eat, drink or smoke when using this product.
Keep cool.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Causes serious eye damage.
Flammable liquid and vapour.
Toxic to aquatic life with long lasting effects.
Very toxic to aquatic life with long lasting effects.
Very toxic to aquatic life.
May cause respiratory irritation.
Harmful if inhaled.
Causes serious eye irritation.
May cause an allergic skin reaction.
Causes skin irritation.
Harmful if swallowed.
Dispose of contents/container to …
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Remove contaminated clothing.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES:
IF ON SKIN:
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Do no eat, drink or smoke when using this product.
Keep cool.
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Causes serious eye damage.
Flammable liquid and vapour.
Toxic to aquatic life with long lasting effects.
Very toxic to aquatic life with long lasting effects.
Very toxic to aquatic life.
May cause respiratory irritation.
Harmful if inhaled.
Causes serious eye irritation.
May cause an allergic skin reaction.
Causes skin irritation.
Harmful if swallowed.
P210, P501, P304+P340, P303+P361+P353, P362, P310, P305, P302, P285, P280, P273, P271, P270, P235, P103, P102, P101, H318, H226, H411, H410, H400, H335, H332, H319, H317, H315, H302
Customers ask customers
Technical question
Zoltan V.
| May 13, 2021
I also put Seatec GTI 30 after put on 4layer Epoxy Epotec on my HANSE 370 boat. I also read that the colour of the antifouling first time is bronze colour and after 3-5 months goes to an antrhrazit graphite colour. Unfortunately my Seatec GTI 30 at opening was anthrazit colour , on the boat still anthrazit colour !!! I use before VC17M on my Jeanneau but first also looks bronze colour. Also the paint looks harder and thicker then the VC17m or VC17m Extra. I read the Seatec GTI 30 is also manufactured by International, why my Seatec GTI 30 not looks like as described by SVB????
Answer
Hugo A.
| May 14, 2021
Hi! It says there "Grey Graphite"... The last one I bought that was copper colour was back in the end of 2017, then changed to this colour. In the end, its the same final colour. But more important, the effectiveness. :-)
Technical question
Soeren L.
| Oct 10, 2020
Can Plasmotec primer +GTI 30 be safely applied to Michigan Goldline (HTB1 manganese bronze) propellers and stainless driveshafts?
Answer
Soeren L.
| Oct 6, 2022
YES, by experience it can safely be applied to metals. However harmless to metal, primers for GPR won't stick properly to metal so the both primer and GTI 30 will soon disappear from propellers and shafts. The best solution for stainless and bronze alloys, after testing all sorts in the Baltics for more than 50 years: Remove old paint completely. Use an etching metals primer first, then apply a specific, for the purpose, antifouling. !! Method is Not tested on sterndrives !!
Technical question
Jami J.
| Feb 19, 2020
Can I use this over Hempel Ecopower racing?
Answer
Soeren L.
| Oct 11, 2020
Seatec doesn't give a lot of instructions on the tin, but since GTI properties are (close to) identical to VC17, I'd suggest to their guidance: "Conventional antifouling paints, removals is best but if this is not possible, start sanding with 80 grade (grit) paper and progressively sand with finer grades until the final sanding with 320 grade (grit). Remove sanding residue." I switched to GTI 30 to get the smooth, non layer building feature. Therefore had a complete removal of old antifouling (dry ice blasting) to get a perfect start, then Plasmotec primer and finally GTI. Very smooth result and so far kept the hull clean for two seasons (on land during winter). Boat is in the Baltic Ocean. I'll apply an new layer before next launch. Just personal experience., use it if you like.
Technical question
Attila M.
| Mar 22, 2018
I was using for years International VC17m for Balaton lake (sweet water). I have 2 questions: 1. Was that a right choice? 2. Is it possible to paint over with Seatec Gti30? Thanks for your answer
Answer from SVB customer service
Judith S.
| Apr 9, 2018
Answer
Zoltan V.
| May 13, 2021
I also put Seatec GTI 30 after put on 4layer Epoxy Epotec on my HANSE 370 boat. I also read that the colour of the antifouling first time is bronze colour and after 3-5 months goes to an antrhrazit graphite colour. Unfortunately my Seatec GTI 30 at opening was anthrazit colour , on the boat still anthrazit colour !!! I use before VC17M on my Jeanneau but first also looks bronze colour. Also the paint looks harder and thicker then the VC17m or VC17m Extra. I read the Seatec GTI 30 is also manufactured by International, why my Seatec GTI 30 not looks like as described by SVB????
Answer
Szabolcs S.
| May 13, 2021
The Seatec does not change colour like the VC17. It is anthracit at applucation and stays like that. This was actually documented somewhere as a difference from VC. But it is normal, I've been using it for years without any problem.
Answer
Soeren L.
| May 13, 2021
SVB will have to answer for their product themselves but I can't remember seeing anywhere that they say GTi 30 is bronze on application? The PROPERTIES for VC17 and GTI 30 are close to identical and they are stated to by compatible in that you can add one on top of the other. The VC17 formula has changed over time, from thin as water to a heavier viscosity. In the beginning it dried immediately (like a permanent marker pen) but that was not easy to apply evenly. I believe (I do not have any proof) that the products build on the same technology. Probably supplied in some form to both brands by Voss in Hamburg. Using GTI 30 now in my 4th season, washed an reapplied every second year after spending the winter on the hard!
Customers also bought
-54%
Petroleum Heater
€108.99
only
€49.95
> 100
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€8.95
(€127.86 / L)
6 variants
3M
Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
from
€3.10
(€0.06 / m)
2 variants
-25%
SEATEC
Antifouling Thinner
€19.94
only
€14.95
(€19.93 / L)
-18%
SEATEC
EPOTEC Epoxy Primer
€33.95
from
€27.95
(€37.27 / L)
2 variants
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!