SEATEC EPOTEC Epoxy Primer
SVB item number: 24201
Manufacturer no.: 24201
Ideal for osmosis prevention and repairs on GRP, as well as for corrosion protection on metals below and above the waterline.
Product details
Recommended retail price:
€33.95
only
€27.95
(€37.27 / L)
-18%
You save: €6.00
Shipping information:
Dangerous goods
available
| in stock
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 24201
- EAN
- Manufacturer no. 24201
- Description SEATEC - EPOTEC epoxy primer
- No. of components 2 components
- Area of application Hull, Above water, Below water
- For substrate GRP, Wood, Steel, Aluminium
- Method of application Roller, Brush
- Osmosis prevention Yes
- Colour White
- Contents 0.75 l
- Yield (theoretical) 5.63 m²
- Overcoating intervals See data sheet
- No. of coats (recommended) 5 - 10
- Shipping information Dangerous goods
Product details
Universal 2-component epoxy primer for use on GRP, steel, plywood or aluminium. Suitable as a primer and barrier for below or above the waterline. This water-vapor-tight primer has excellent adhesion properties and prevents corrosion on steel and osmosis on GRP surfaces (at least 5 coats required). SEATEC EPOTEC can be reworked with 1-component and 2-component coating systems and SEATEC antifouling. Yield: approx. 7.5 m2/l, colour: white.
Application note: The surface must be dry, clean, free of grease and fully intact. Before applying the primer, the substrate should be roughened by sanding, then the sanding dust should be thoroughly removed. Mix base and hardener carefully in the specified mixing ratio of 2 : 1 by volume and mix thoroughly. The processing temperature should be between +10 °C and +25 °C. The recoating interval with the same coating at 20 °C is at least 8 hours and a maximum of 5 days. If antifouling is applied, the recoating interval at 20 °C is between 4 and 24 hours; the substrate should still be slightly tacky. The mixture will have a white colour. The pot life at 20 °C is around 20-30 minutes, the drying time around 5 hours. With a dry film thickness of 60 µm, the coverage is approx. 7.5 m² per litre.
Application note: The surface must be dry, clean, free of grease and fully intact. Before applying the primer, the substrate should be roughened by sanding, then the sanding dust should be thoroughly removed. Mix base and hardener carefully in the specified mixing ratio of 2 : 1 by volume and mix thoroughly. The processing temperature should be between +10 °C and +25 °C. The recoating interval with the same coating at 20 °C is at least 8 hours and a maximum of 5 days. If antifouling is applied, the recoating interval at 20 °C is between 4 and 24 hours; the substrate should still be slightly tacky. The mixture will have a white colour. The pot life at 20 °C is around 20-30 minutes, the drying time around 5 hours. With a dry film thickness of 60 µm, the coverage is approx. 7.5 m² per litre.
Documents
Safety datasheet
PDF (815,36 KB)
Safety datasheet
PDF (749,03 KB)
Safety datasheet
PDF (815,00 KB)
Safety datasheet
PDF (754,75 KB)
Safety datasheet
PDF (828,02 KB)
Safety datasheet
PDF (761,88 KB)
Safety datasheet
PDF (828,89 KB)
Safety datasheet
PDF (757,92 KB)
Product safety
Please note the following hazard warnings:
UN number
UN 1263
Transport class
3
Hazard pictograms
Signal word
Danger
Hazard warnings
If medical advice is needed, have product container or label at hand.
Dispose of contents/container to …
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
Contains epoxy constituents. May produce an allergic reaction.
Highly flammable liquid and vapour.
Causes serious eye damage.
Harmful to aquatic life with long lasting effects.
May cause damage to organs through prolonged or repeated exposure.
May cause drowsiness or dizziness.
May cause respiratory irritation.
May cause an allergic skin reaction.
Causes skin irritation.
Flammable liquid and vapour.
Dispose of contents/container to …
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
Contains epoxy constituents. May produce an allergic reaction.
Highly flammable liquid and vapour.
Causes serious eye damage.
Harmful to aquatic life with long lasting effects.
May cause damage to organs through prolonged or repeated exposure.
May cause drowsiness or dizziness.
May cause respiratory irritation.
May cause an allergic skin reaction.
Causes skin irritation.
Flammable liquid and vapour.
P101, P501, P333+P313, P305+P351+P338, P310, P280, P271, P260, P210, P102, EUH205, H225, H318, H412, H373, H336, H335, H317, H315, H226
Customers ask customers
Technical question
Johann B.
| Sep 24, 2021
does the epotec primer contain solvents? I want to put coppercoat over it, and the instructions state to NOT use a primer with solvents or wait 7 days until it evaporated.
Answer from SVB customer service
Cory V.
| Mar 9, 2023
Dear customer, in this case its recommened to wait about a week after application to coat over.
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€8.95
(€127.86 / L)
6 variants
-30%
Mixing Cups with Lid
€1.36
from
€0.95
2 variants
-25%
SEATEC
GTI 30 Thin-Film Antifouling / graphite
€52.96
from
€39.95
(€53.26 / L)
2 variants
-32%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€37.95
from
€25.95
(€34.60 / L)
8 variants
-17%
SEATEC
Epoxy Thinner
€29.95
only
€24.95
(€33.27 / L)
-19%
SEATEC
Epoxy Resin
€26.95
from
€21.95
(€43.90 / kg)
3 variants
-19%
SEATEC
Epoxy Putty
€31.95
from
€25.95
(€51.90 / kg)
2 variants
Similar items
-17%
SEATEC
PLASMOTEC One-Component Underwater Primer
€23.95
from
€19.95
(€26.60 / L)
2 variants
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
from
€29.95
(€39.94 / L)
2 variants
INTERNATIONAL
INTERPROTECT Two-Component Epoxy Primer
from
€34.95
(€46.60 / L)
4 variants
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
from
€35.95
(€47.93 / L)
4 variants
INTERNATIONAL
2-Component VC TAR2 Epoxy Primer
from
€44.95
4 variants
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€39.95
(€53.26 / L)
2 variants
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
only
€34.95
(€46.60 / L)
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€25.95
(€70.14 / L)
5 variants
HIGH PROTECT II Two-Component Epoxy Primer
from
€109.95
(€43.98 / L)
2 variants
HEMPEL
Sealer 05991 / transparent
only
€42.95
(€57.26 / L)
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!