SEATEC Epoxy Putty

Name: Epoxy Putty
Brand: SEATEC
Price: 25.95 EUR
Availability: InStock
Rating: 4.68 (50 reviews)

SVB item number: 24208 Manufacturer no.: 24208

View Ratings (50)

View Ratings (50) Questions (12)

Item 24208

Item 24208

Item 24207

Matej W.: "putty - great, used on a bit moldy wood for mast ba..."

Used on a Bénéteau Oceanis 37

Used on a Sangria

Used on a Sonate Ovni 385

Is in 3 shopping baskets right now, grab yours now!

Has been sold 9 times in the last 7 days

Resistant to water and oils. Suitable for GRP, steel, aluminum, and hardwood in above and below water areas. Also used as a substitute for gelcoat in an osmosis restoration. Product details

Recommended retail price: €31.95

only €25.95 (€51.90 / kg)

-19%

VAT inc., ex-works

You save: €6.00

Shipping information: Dangerous goods

Contents

available | in stock

Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.

Are you already using this item?

Add to my boat now.

To wish list Compare

At a glance!

No. of components: 2 components

customers like: Use

customers like: Yield

by alain G.

Apart from this drawback, the product is easily sanded and sanded

Read all product reviews

by Dieter G.

Good to work with.

Read all product reviews

by Christian A.

Good product, easy use rebouches well the defects

Read all product reviews

by Jean-Paul B.

RAS only the port too expensive

Read all product reviews

by Alfred B.

Color is white to cream white For filling a steel hull after repair work.

Read all product reviews

Product data

SVB item number 24208
EAN
Manufacturer no. 24208
Description SEATEC - Epoxy putty
Contents 0.5 kg
No. of components 2 components
Base Epoxy
Package Tin
Method of application Filler
For substrate GRP, Wood, Steel, Aluminium, CFRP
Area of application Above water, Below water
Fast drying No
Max. layer thickness 20 mm
Pot life 30 min
Sandable Yes
Temperature range min. 10°C °C
Colour Grey
Shipping information Dangerous goods

SVB item number 24207
EAN 4260416460317
Manufacturer no. 24207
Description SEATEC - Epoxy putty
Contents 2 kg
No. of components 2 components
Base Epoxy
Package Tin
Method of application Filler
For substrate GRP, Wood, Steel, Aluminium, CFRP
Area of application Above water, Below water
Fast drying No
Max. layer thickness 20 mm
Pot life 30 min
Sandable Yes
Temperature range min. 10°C °C
Colour Grey
Shipping information Dangerous goods

Product details

Versatile, 2-component, solvent-free epoxy putty for repairs and filling in areas below and above the waterline. Suitable for all common boatbuilding materials. The putty can be applied without shrinkage and cracking in a thickness of up to 2.0 cm per application. When cured, it has a high degree of water resistance and good sanding properties. Can also be used to put a stop to osmotic damage. GRP, steel and aluminum substrates should first be primed with the 2-component SEATEC EPOXY PRIMER prior to applying the putty. Color of the mixture: light grey.

Processing temperature: at least +10° C
Pot life: approx. 30 minutes (+20° C)
Sandable after: approx. 6 hours (+20° C)

Application note: The surface must be dry, clean, free of grease and fully intact. Loose or poorly adhering components should be removed or sanded down, sanding dust thoroughly removed. Before filling, priming with a 2K epoxy primer is recommended. Base and hardener must be mixed in a ratio of 2:1 by volume or weight until a homogeneous, light grey colour is achieved. Mix only enough that can be used in 15 minutes. Do not work with the product at temperatures below +10 °C ; accelerated curing is possible by applying heat up to a maximum of +60 °C. A maximum layer thickness of 2 cm may be applied per application. If a greater overall layer thickness is desired, the last layer must be sanded before applying a new one. An interval of a maximum of 24 hours before reworking should be maintained between two layers at +20 °C.

Documents

Safety datasheet

PDF (565,40 KB)

Safety datasheet

PDF (567,41 KB)

Product safety

Please note the following hazard warnings:

UN number

UN 3082

Transport class

Hazard pictograms

Signal word

Danger

Hazard warnings

Caution! Hazardous respirable droplets may be produced when spraying. Do not inhale aerosol or mist.
Do not breathe dust/fume/gas/mist/vapours/spray.
Dispose of contents/container to …
Store locked up.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
Collect spillage.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Wash … thoroughly after handling.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Contains (name of sensitising substance). May produce an allergic reaction.
Contains epoxy constituents. May produce an allergic reaction.
Causes severe skin burns and eye damage.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Causes skin irritation.

EUH211, P260, P501, P405, P305+P351+P338, P303+P361+P353, P301+P330+P331, P391, P310, P280, P273, P264, P102, P101, EUH208, EUH205, H314, H319, H317, H411, H315

What other SVB customers have to say

100% real reviews

50 customer reviews

4.7 (out of 50 ratings)

5 Stars

(38)

4 Stars

(9)

3 Stars

(2)

2 Stars

(1)

1 Stars

(0)

100% recommend SVB

Advantages
Yield (theoretical) (8)
Use (10)
Yield (9)
Package (8)
Colour (8)
Price/performance ratio (6)
Drying time (8)

by Christophe W.

9/8/2021 Verified purchase Variant: 24207

Translated automatically
Show original text

Great product

You have to be very precise in the proportions (weigh with a scale) if you do not mix the whole pot. If you're not precise with 2-component products, they take much longer to dry or even don't dry and stay sticky!

by Ronald B.

4/26/2021 Verified purchase Variant: 24208

Translated automatically
Show original text

Very good spatula

Easy to work with

by Mario P.

4/23/2021 Verified purchase Variant: 24207

Translated automatically
Show original text

epoxy filler

Good material. Fast delivery and most importantly great service and very nice and friendly sales advisors. Any time.

by Stefan G.

3/30/2021 Verified purchase Variant: 24208

Translated automatically
Show original text

epoxy filler

Easy to process.

by Claude M.

3/10/2021 Verified purchase Variant: 24208

Translated automatically
Show original text

good products

I really appreciate the use of this product for the preparation of the hull.

View all ratings

Rate product

How would you rate this product?

Disappointed

Completely fails to meet my expectations

Poor

Only some expectations are met

Meets my basic expectations

Good

Slightly better than my general expectations

Excellent

Fully exceeds my expectations

Click on the stars to rate

Customers ask customers

General question

Robin Y. | Jan 11, 2025

Hi how much do you get in the pot in mm or weight...??

No answers yet. Be the first to answer this question!

SEATEC Epoxy Putty

At a glance!

Product data

Product details

Documents

Product safety

What other SVB customers have to say

50 customer reviews

Rate product

Customers ask customers

Did you know?

Customers also bought

Similar items

Last seen products