SEATEC PLASMOTEC One-Component Underwater Primer
SVB item number: 24217
Manufacturer no.: 24217
The 1-component primer PLASMOTEC is suitable for underwater areas and can be used on steel, aluminium, wood and GRP. Product details
Recommended retail price:
€23.95
only
€19.95
(€26.60 / L)
-17%
You save: €4.00
Shipping information:
Dangerous goods
available
| in stock
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 24217
- EAN 4260416460188
- Manufacturer no. 24217
- Description SEATEC - PLASMOTEC underwater primer
- No. of components 1 component
- Area of application Hull, Below water
- For substrate GRP, Wood, Steel, Aluminium
- Method of application Roller, Brush
- Osmosis prevention No
- Colour Grey
- Contents 0.75 l
- Yield (theoretical) 6 m²
- Overcoating intervals See data sheet
- No. of coats (recommended) 2 - 4
- Shipping information Dangerous goods
Product details
1-component primer for underwater coating based on chlorinated rubber. SEATEC Plastomec is ideal as a barrier primer under antifouling and as bonding agent when changing antifouling. It offers high-quality, water-resistant protection against penetrating moisture on GRP, wood or metallic substrates. Fast drying. Recoatable with almost all antifouling types.
Colour shade: grey Coverage: approx. 8 m²/Liter.
Application note:The surface must be dry, clean, free of grease and fully intact. It should also be sanded rough. PLASMOTEC is applied undiluted to the substrate and can be used at temperatures between 0°C and 30°C. Direct sunlight during processing should be avoided. Application with brush or roller only. A minimum waiting time of 4-6 hours at 20°C should be observed between coats.
At low temperatures, applying in several thin layers is recommended. Consumption is approximately 100 ml/m². After a drying time of 6 hours at +20°C, antifouling can be applied. For a moisture barrier on new substrates, 4–5 layers are recommended, while 1–2 layers are sufficient when changing antifouling.
Colour shade: grey Coverage: approx. 8 m²/Liter.
Application note:The surface must be dry, clean, free of grease and fully intact. It should also be sanded rough. PLASMOTEC is applied undiluted to the substrate and can be used at temperatures between 0°C and 30°C. Direct sunlight during processing should be avoided. Application with brush or roller only. A minimum waiting time of 4-6 hours at 20°C should be observed between coats.
At low temperatures, applying in several thin layers is recommended. Consumption is approximately 100 ml/m². After a drying time of 6 hours at +20°C, antifouling can be applied. For a moisture barrier on new substrates, 4–5 layers are recommended, while 1–2 layers are sufficient when changing antifouling.
Documents
Safety datasheet
PDF (662,53 KB)
Safety datasheet
PDF (666,47 KB)
Safety datasheet
PDF (673,45 KB)
Safety datasheet
PDF (671,63 KB)
Product safety
Please note the following hazard warnings:
UN number
UN 1263
Transport class
3
Hazard pictograms
Signal word
Warning
Hazard warnings
Contains (name of sensitising substance). May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
Dispose of contents/container to …
Flammable liquid and vapour.
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
Dispose of contents/container to …
Flammable liquid and vapour.
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
EUH208, P101, P102, P210, P260, P271, P280, P501, H226, H315, H319, H335, H336, H373, H412
Customers ask customers
Technical question
Jerry L.
| Apr 17, 2019
Good evening, Which thinner should be used with this PLASMOTEC One-Component Underwater Primer? Or should it be used at all? Thanks.
Answer
Raphael H.
| Apr 17, 2019
I have not used the Plasmotec primer yet so do not know what thinner, if any should be used. It should give better protection without thinning.
Technical question
brian j.
| Feb 15, 2020
Can this product be used as a primer for jotun seaforce 30 antifouling? thanks
Answer from SVB customer service
Cory V.
| Oct 7, 2022
Dear customer, please email [email protected] in this case.
Technical question
Markku S.
| Nov 5, 2020
How many years is plasmotec available to use? I bought few liters three years ago and they have been closed and sealed in plastic in cool place. Is pltec still ok goood and to paint?
Answer from SVB customer service
Cory V.
| Dec 30, 2020
Dear customer, there should be a batch number with the dates printed on the container to check. Thanks.
Technical question
Karlis B.
| Nov 20, 2020
Hello, Can I use Plasmotec to seperate Seatech hard antifoiling paint from VC 17m extra?
Answer from SVB customer service
Cory V.
| Oct 7, 2022
Dear customer, please email [email protected] in this case.
General question
Lennart C.
| Jan 5, 2021
Hi How many layer do I need of this Product Before I use antifouling,
Answer from SVB customer service
Cory V.
| Oct 7, 2022
Dear customer, please email [email protected] in this case.
Customers also bought
-32%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€37.95
from
€25.95
(€34.61 / L)
8 variants
-26%
SEATEC
SPRINT PRO Hard Antifouling
€49.94
from
€36.95
(€49.27 / L)
7 variants
-25%
SEATEC
Antifouling Thinner
€19.94
only
€14.95
(€19.93 / L)
-18%
SEATEC
EPOTEC Epoxy Primer
€33.95
from
€27.95
(€37.27 / L)
2 variants
-19%
SEATEC
Epoxy Putty
€31.95
from
€25.95
(€51.90 / kg)
2 variants
Similar items
-18%
SEATEC
EPOTEC Epoxy Primer
€33.95
from
€27.95
(€37.27 / L)
2 variants
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
from
€29.95
(€39.94 / L)
2 variants
INTERNATIONAL
INTERPROTECT Two-Component Epoxy Primer
from
€34.95
(€46.60 / L)
4 variants
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
from
€35.95
(€47.93 / L)
4 variants
INTERNATIONAL
2-Component VC TAR2 Epoxy Primer
from
€44.95
4 variants
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€39.95
(€53.26 / L)
2 variants
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
only
€34.95
(€46.60 / L)
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€25.95
(€70.14 / L)
5 variants
HIGH PROTECT II Two-Component Epoxy Primer
from
€109.95
(€43.98 / L)
2 variants
HEMPEL
Sealer 05991 / transparent
only
€42.95
(€57.26 / L)
Last seen products
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!