Customer ratings

Easy assembly. Once started it works fine but after a couple of days it no longer cools. The compressor has lost gas. I thought I was the one responsible for not tightening the quick fittings properly. I proceeded to disassemble it and take it to a refrigeration technician to have it recharged and here, to our surprise, we discovered that the filling valve had not been properly closed in the factory. Once refilled, tightened the valve and reassembled it seems to work very well.

Use the compressor on a 30 ft sailboat. Volume about 30 liters. Assembly was incl. The line connections easily possible. The evaporator (simple plate evaporator) is very thin, so I'm worried that it will be damaged by the refrigerated goods in the sea state, especially since an attachment is provided only at the plate corners. It is inevitable that the evaporator directly supports the refrigerated goods. The compressor runs quite loud despite sound isolation, comparable to the drinking water pump. He only starts for five seconds, with the thermostat turning on and off with a very hard and loud clack. Overall, it is better for sensitive ears to turn off the compressor at night.

no cold after connection? \ r \ nDelivered without GAS \ r \ nIntervention of a refrigeration + 90 € Isotherm to banish

I bought the isothermal device because it was previously installed and I only want to exchange 1 to 1. The old appliances lasted only 5 years. Thereafter, the condenser grids on the compressor were so rusted that it was probably leaking there. For the one 0815 refrigerator for home with the same technology only costs 200 € and here the naked technology for use on yachts 2.5 times, the price performance ratio is super bad. Why is not it stainless? It's wet on a boat. The assembly of the evaporator is also a cramp. It is always installed hanging. There would be a simpler method than having to mount the 4 screws with spacers blind with snake fingers. For example like the compressor unit also with a mounting plate and click closure for the evaporator.

After installation the cold group does not work, we have 14v voltage to the group and it does not start, even with the thermostat breaking.
Nonfunctional...