Is in 2 shopping baskets right now, grab yours now!
This sturdy 2D diesel air heater from Autoterm Air is perfect for smaller boats due to its compact size. Adjusting power levels and temperature is child's play. Maximum heating output: 2.0kW. Voltage: 12V. Supplied with control unit and bracket. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings.
Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP
address. Please also check your browser for updates.
This sturdy 2D diesel air heater from Autoterm Air is perfect for smaller boats due to its compact size (under 7.5 m / we recommend the 4D for larger boats). The digital control panel (including temperature sensor) makes it extremely easy to adjust power levels and temperature. The air heater is certified (e2) and can be installed without registration. The hole dimensions are identical to those of the popular Webasto or Erberspächer heaters, so it is easy to replace without having to drill new holes. Delivery includes an altitude kit and all the components needed for installation.
The heater's cable harness features a gate input for connecting your own remote control or other secondary control unit. You can choose whether the connection is made via ON/OFF switch or pulse. The advantage of the latter means that it is possible to operate the heater with different controllers. For example, you can switch on with a remote control or a push-button and later adjust power levels or even switch off from your bed using the included control element.
In addition, the air heater is equipped with a so-called altitude kit. Thanks to this altitude kit, the heater automatically reduces the quantity of fuel injected depending on the ambient air pressure. This prevents or drastically reduces the likelihood of the combustion chamber from clogging with carbon particulate in the event of a falling air oxygen content.
Maintenance is not normally necessary. However, to prolong service life the combustion chamber must be allowed to get really hot from time to time to burn off any residues. As a rule, running the heater at full power for at least half an hour once every week or every two weeks is enough to allow the combustion chamber to reach full temperature again.
Supplied with new control unit
The new Comfort Control boasts a modern design and numerous functions, such as three adjustable timers, extended heating modes, fan functions and much more. The intelligent thermostat function, for example, automatically switches the heating on when the temperature falls below a set number and similarly turns it off once a set temperature is reached. Multifunctional rotary knob with grippy rubber coating and OLED display. Small installation dimensions, easy to use, stylish design. Temperature sensor included.
Technical Data
Voltage
12 V
Current consumption (watts)
10 - 29 W
Heating capacity
0.8 - 2.0 kW
Airflow rate
34 - 86 m³/h
Fuel consumption
0.10 - 0.24 l/h
Hot air pipe
60 mm
Dimensions (LxHxT)
330 x 120* x 120 mm
* + 25 mm for the connections
Weight of the heater (without accessories)
2.90 kg
NOTE:
Included
12 V heater
Comfort Control unit
Autoterm fuel pump
Exhaust silencer (170 x 90 x 50 mm)
Dosing pump rubber holder
Dosing pump wire harness
Heater wire harness
Intake air hose with integrated silencer
Heat protection hose
End piece exhaust pipe + clamp
Tank intake pipe
5.5 m fuel line
Fuel line connector
1 m corrugated metal exhaust pipe
Screws, nuts, brackets, heat shrink tubing, cable ties
Instruction manual
Bracket
Features
Discover the features that make this product stand out. From technical details to special
functions – we’ve summarized all the key information for you.
The heater was ordered as a replacement for an Ebersbächer 4D. The conversion was very simple; the diesel and exhaust lines, as well as the mounting bracket, could be reused. The air ducts could also be reused after the transitions were installed. After the initial test run, I retrofitted a silencer at the air intake; the noise is now within a tolerable range.
Hello Joonas, Autotherm produce in the Ukraine. The supply of spare parts works pretty well, because the most parts are in stock of German wholesaler. Yours SVB-team.
Autotherm has production in Ukraine. The supply of spare parts works pretty smoothly because almost everything can be obtained promptly from the German wholesaler.