INTERNATIONAL WOODSKIN 1-Component Semi-Gloss Varnish
SVB item number: 41171
Manufacturer no.: YVC316/750AZ
International's 1-component WOODSKIN clearcoat penetrates deep into the wood and leaves a thin film surface that does not crack or flake. The result is a breathable and water-repellent skin layer that still allows the wood to expand and contract. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 41171
- EAN 5035686892132
- Manufacturer no. YVC316/750AZ
- Description WOODSKIN 1-component semi-gloss varnish
- Contents 750 ml
- No. of components 1 component
- Finish Silk mat
- Area of application Inside, Outside
- For substrate Wood
- Method of application Roller, Brush
- Yield (theoretical) 7.5 m²
- No. of coats (recommended) 3
- Shipping information Dangerous goods
Product details
International's 1-component WOODSKIN varnish penetrates deep into the wood and leaves a thin film surface that does not crack or flake. The result is a breathable and water-repellent skin layer that still allows the wood to expand and contract. Suitable for use on all types of wood, including oily woods such as teak, and can be used on the interior and exterior. No sanding required between coats, will not crack or chip. Apply using a brush. Coverage: 10 m²/litre. Thinner No.1.
Processing instructions:
For coated surfaces:
Remove any existing layers of paint. Sanding is not necessary before applying Woodskin, but can be done as desired with 80-180 grit and then 280 grit. Then remove any sanding residue.
For uncoated surfaces:
Application: Woodskin can be applied to the (prepared) surface without thinning. Sanding between coats is not necessary.
Number of coats: min. 3 coats
Drying time at 15° C: 4 hours
Processing time at 15° C: min. 24 hours
Processing temperature: +5° C to max. 35° C
Processing instructions:
For coated surfaces:
Remove any existing layers of paint. Sanding is not necessary before applying Woodskin, but can be done as desired with 80-180 grit and then 280 grit. Then remove any sanding residue.
For uncoated surfaces:
- Bare wood: Sanding is not necessary before applying Woodskin, but can be done as desired with 80-180 grit and then 280 grit. Then remove any sanding residue.
- Oily woods: Sanding is not necessary before applying Woodskin, but can be done as desired with 80-180 grit and then with 280 grit. Then remove all dust and degrease the surface with Thinner No. 1.
Application: Woodskin can be applied to the (prepared) surface without thinning. Sanding between coats is not necessary.
Number of coats: min. 3 coats
Drying time at 15° C: 4 hours
Processing time at 15° C: min. 24 hours
Processing temperature: +5° C to max. 35° C
Documents
Product safety
Please note the following hazard warnings:
UN number
UN 1263
Transport class
3
VOC content
447 g/l
Hazard pictograms
Signal word
Warning
Hazard warnings
And wash before wearing again.
Keep out of reach of children.
Dispose of contents/container to …
Keep cool.
Remove contaminated clothing.
IF ON SKIN:
Wash skin with water (or shower).
Remove/Take off immediately all contaminated clothing.
IF ON SKIN (or hair):
Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Wear protective gloves/protective clothing/eye protection/face protection.
If medical advice is needed, have product container or label at hand.
Read label before use.
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.
Keep out of reach of children.
Dispose of contents/container to …
Keep cool.
Remove contaminated clothing.
IF ON SKIN:
Wash skin with water (or shower).
Remove/Take off immediately all contaminated clothing.
IF ON SKIN (or hair):
Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Wear protective gloves/protective clothing/eye protection/face protection.
If medical advice is needed, have product container or label at hand.
Read label before use.
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.
P364, P102, P501, P235, P362, P302, P353, P361, P303, P260, P273, P210, P280, P101, P103, H226, H336, H412
Customers ask customers
No questions asked yet. Be the first to ask a question!
More "Customers ask customers" available in the following languages
Similar items
INTERNATIONAL
COMPASS One-Component High-Gloss Clear Varnish
from
€29.95
(€39.94 / L)
2 variants
INTERNATIONAL
ORIGINAL One-Component Clear Varnish
from
€30.95
(€41.27 / L)
2 variants
INTERNATIONAL
SCHOONER One-Component Clear Varnish
only
€36.95
(€49.27 / L)
INTERNATIONAL
GOLDSPAR SATIN One-Component Clear Varnish
from
€28.95
(€38.60 / L)
2 variants
-15%
EPIFANES
One-Component Satin Finish Clear Varnish
€50.34
only
€42.95
-10%
EPIFANES
RAPIDCLEAR Semi-Gloss Finish
€37.84
only
€33.95
(€45.27 / L)
-10%
EPIFANES
RAPIDCOAT Semi-Gloss Finish
€37.84
only
€33.95
(€45.27 / L)
-10%
EPIFANES
One-Component Satin Matt Oil Varnish for Hard Wood
€52.12
only
€46.95
-16%
EPIFANES
One-Component Hardwood Oil Varnish
€52.12
only
€43.95
-9%
EPIFANES
One-Component Clear High-Gloss Boat Varnish for Wood
€25.35
from
€22.95
(€45.90 / L)
3 variants
Last seen products
-9%
CAN STEEL
RVS Gas Oven / 2 Burners
€710.43
only
€649.95
-14%
HELLA MARINE
Series 2984 Masthead Light
€79.14
only
€67.95
24
TBS
JAZARU Women's Shoe / beige / size: 42
-20%
SEATEC
MARLIN Inflatable Boat / NEMO 200 / 2.0 m / light grey/white / max. 2.5 HP
€449.95
only
€359.95
40
-15%
MAESTRINI
VENEZIA CR Brass Seawater Strainer / angled
€234.55
from
€199.95
4 variants
-8%
SEAEQ
Fender Mat / grey / 2100 x 550 mm
€289.90
only
€265.95
3
-6%
BARTON
Single Blocks with Swivel / 10 mm / ball bearing
€32.80
only
€30.95
Available on 16.06.2026
HENGST
Oil Filter for Deutz Engines
only
€12.95
15
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!