INTERNATIONAL GOLDSPAR SATIN One-Component Clear Varnish
SVB item number: 40523
Manufacturer no.: YVA251/750AR
For a warm, rich sheen finish! This quick-drying, hard-wearing varnish gives wooden interiors a warm and friendly atmosphere. For interior use, especially suitable for galleys and wet rooms.
Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 40523
- EAN 5035686954212
- Manufacturer no. YVA251/750AR
- Description INTERNATIONAL - GOLDSPAR SATIN
- Contents 0.75 l
- No. of components 1 component
- Finish Silk mat
- Area of application Inside
- For substrate Wood
- Method of application Roller, Brush
- Yield (theoretical) 8.63 m²
- No. of coats (recommended) 3 - 4
- Shipping information Dangerous goods
Product details
Quick-drying, durable polyurethane varnish. The satin finish of this varnish gives wooden interiors a warm and friendly atmosphere. The surface is resistant to hot water and mild acids. This makes the varnish especially suitable for galleys and wet rooms. Coverage: about 11.5 m²/litre. Thinner No.1.
Application instructions:
For coated surfaces:
Degrease surface with Thinner No. 1 and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
Application instructions:
For coated surfaces:
Degrease surface with Thinner No. 1 and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Degrease thoroughly with Thinner No. 1. Sand smooth with 80-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. Then apply wood treatment and allow to dry.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Then thin the 1st coat of Goldspar Satin by 10-15 % before applying. Then apply a minimum of 3 unthinned coats. After every 2nd coat, sand with 320-400 grit.
Number of coats: 3-4 coats
Drying time at 15° C: 3 hours
Processing time at 15° C: min. 15 hours
Processing temperature: +5 °C to max. 35° C
Documents
Product safety
Please note the following hazard warnings:
UN number
UN 1263
Transport class
3
LQ weight
0.8 l
VOC content
425 g/l
Hazard pictograms
Signal word
Warning
Hazard warnings
Read label before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Wear protective gloves/protective clothing/eye protection/face protection.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid release to the environment.
Do not breathe dust/fume/gas/mist/vapours/spray.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair):
Remove/Take off immediately all contaminated clothing.
Wash skin with water (or shower).
Keep cool.
Dispose of contents/container to …
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Wear protective gloves/protective clothing/eye protection/face protection.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid release to the environment.
Do not breathe dust/fume/gas/mist/vapours/spray.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair):
Remove/Take off immediately all contaminated clothing.
Wash skin with water (or shower).
Keep cool.
Dispose of contents/container to …
Flammable liquid and vapour.
May cause drowsiness or dizziness.
P103, P102, P101, P280, P210, P273, P260, P314, P303, P361, P353, P235, P501, H226, H336
Customers ask customers
No questions asked yet. Be the first to ask a question!
Customers also bought
-24%
Stainless Steel Hose Clamps
€2.76
from
€2.10
18 variants
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€8.95
(€127.85 / L)
6 variants
INTERNATIONAL
DANBOLINE Bilge Paint
from
€24.95
(€33.27 / L)
4 variants
INTERNATIONAL
Thinner No.1
from
€13.95
(€27.91 / L)
2 variants
-26%
YACHTICON
Algae and Barnacle Deposits Remover
€18.75
only
€13.95
(€27.91 / L)
3M
Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
from
€3.10
(€0.06 / m)
2 variants
Similar items
INTERNATIONAL
COMPASS One-Component High-Gloss Clear Varnish
from
€29.95
(€39.94 / L)
2 variants
INTERNATIONAL
ORIGINAL One-Component Clear Varnish
from
€30.95
(€41.27 / L)
2 variants
INTERNATIONAL
SCHOONER One-Component Clear Varnish
only
€36.95
(€49.27 / L)
INTERNATIONAL
WOODSKIN 1-Component Semi-Gloss Varnish
only
€29.95
(€39.94 / L)
-15%
EPIFANES
One-Component Satin Finish Clear Varnish
€50.34
only
€42.95
-10%
EPIFANES
RAPIDCLEAR Semi-Gloss Finish
€37.84
only
€33.95
(€45.27 / L)
-10%
EPIFANES
RAPIDCOAT Semi-Gloss Finish
€37.84
only
€33.95
(€45.27 / L)
-10%
EPIFANES
One-Component Satin Matt Oil Varnish for Hard Wood
€52.12
only
€46.95
-16%
EPIFANES
One-Component Hardwood Oil Varnish
€52.12
only
€43.95
-9%
EPIFANES
One-Component Clear High-Gloss Boat Varnish for Wood
€25.35
from
€22.95
(€45.90 / L)
3 variants
Last seen products
-10%
GARMIN
ECHOMAP UHD2 92sv Touch plus GT56UHD-TM Transducer
€1,249.99
only
€1,119.95
5
-10%
MARCO
TC1/P Air Horn
€66.40
from
€59.95
2 variants
JABSCO
Type 50890 Waste Pump / 12V
only
€224.95
14
-24%
SEATEC
Rubber Sanding Block 122 x 66 mm
€6.50
only
€4.95
> 100
EPROPULSION
Anode for Evo Navy 3.0 / EVO POD 1.0 / 3.0
only
€28.00
5
-5%
HONDA
Outboard Propeller for Honda BF 2 / 2.3
€71.78
only
€67.95
3
BNC Connector for RG8X and RG58 Cable
only
€3.20
63
EPROPULSION
Carry Bag for Electric Outboards
only
€99.00
8
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!