SEAJET EMPEROR A 034 Antifouling Spray

SVB item number: 41528 Manufacturer no.: 17502
EMPEROR A self-polishing antifouling spray from SEAJET is easy to use on drives, outboards, small-sized hulls or small areas on the hull. Suitable for substrates made of GRP, wood and aluminium.  Product details
Recommended retail price: €39.95
only  €33.95 (€84.87 / L)
-15%
You save: €6.00
Shipping information: Dangerous goods
available | in stock
pcs.
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
MyBoat
Are you already using this item?
Add to my boat now.

Available variants

EMPEROR A 034 Self-polishing Antifouling
SEAJET EMPEROR A 034 Self-polishing Antifouling
€219.00
only €169.95 (€67.98/ l)
To product

Product data

  • SVB item number 41528
  • EAN 4031396175023
  • Manufacturer no. 17502
  • Description SEAJET - 034 EMPEROR A antifouling spray
  • Antifouling type Self-polishing antifouling
  • Colour Black
  • Colour code Black
  • Contents 400 ml
  • Area of application Below water
  • Hull material GRP, Wood, Steel, Aluminium
  • Method of application Spray can
  • No. of coats (recommended) 2
  • Yield (theoretical) 0.75 m²
  • Immersion after 15 h @ 15 °C
  • Max. time before immersion 6 months
  • For the Netherlands No
  • For Denmark Yes
  • Boat type Sailboat, Motorboat
  • Existing coating INTERNATIONAL Ultra 300, INTERNATIONAL Cruiser 250, INTERNATIONAL Micron 350, HEMPEL Hard Racing TecCel, HEMPEL Classic, HEMPEL Mille NCT, BOERO Altura 619 Plus
  • Typical shelf life 2 Years
  • Shipping information Dangerous goods

SVB recommends

Image of Multipurpose 2-Component Epoxy Primer Spray
-6%
SEAJET Multipurpose 2-Component Epoxy Primer Spray
only €28.95 (€72.38/ l)
Image of 015 Underwater Primer Spray
SEAJET 015 Underwater Primer Spray
only €24.95 (€62.38/ l)

Accessories

Image of Disposable Gloves / vinyl / 100 pcs.
Disposable Gloves / vinyl / 100 pcs.
only €20.95
Image of Premium Respirator Mask
3M Premium Respirator Mask
Image of Safety Goggles
3M Safety Goggles
only €13.95
Image of Protective Overall
3M Protective Overall
from €15.95
Image of Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
3M Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
from €3.10 (€0.06/ m)
Image of Disposable Gloves / vinyl / 100 pcs.
Disposable Gloves / vinyl / 100 pcs.
only €20.95
Image of Premium Respirator Mask
3M Premium Respirator Mask
Image of Safety Goggles
3M Safety Goggles
only €13.95
Image of Protective Overall
3M Protective Overall
from €15.95
Image of Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
3M Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
from €3.10 (€0.06/ m)

Product details

Note:

Use biocidal products with care. Always read the label and product information prior to use.
EMPEROR A self-polishing antifouling spray from SEAJET is easy to use on drives, outboards, small-sized hulls or small areas on the hull. Specially formulated and adapted to the spray can format, the product is quick and easy to apply, giving you excellent results, even in hard-to-reach areas. The polishing property prevents the build-up of thicker layers and provides fouling protection for one season. Suitable for all boat building materials, including aluminium. Yield per spray can: approx. 0.75 m². Number of coats: Two per season.

Application Instructions

Technical specifications:
  • Application temperature: +5° C to +30° C
  • Drying time at 15 °C: 1.5 hours (dust dry)
  • Overcoating time at 15 °C: 6 - 7 hours.
Can be applied to most antifoulings provided they are in good condition.

For coated surfaces
  • In good condition: Remove fouling and impurities completely. Remove loose residues with a high-pressure cleaner. Then wet sand with 100 grit. If existing antifouling is not compatible or unknown, seal with SEAJET 015 Primer.
  • In poor condition: Remove all existing antifouling completely.
GRP / bare gelcoat / wood / aluminium: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use SEAJET Thinner A for degreasing. Coat the surface to be treated with SEAJET 015. Then apply two coats of EMPEROR A. Repeat the 2 layers every 12 months.

Documents

en-flag Datasheet
PDF (52,81 KB)

Product safety

Please note the following hazard warnings:

Contains biocides
Yes
BAuA-No.
N-101563
UN number
UN 1950
Transport class
2
LQ weight
1 l
VOC content
840 g/l
Hazard pictograms
Signal word
Warning
Hazard warnings
Read label before use.
Dispose of contents/container to …
Protect from sunlight. Do not expose to temperatures above 50 °C / 122 °F.
If skin irritation or rash occurs: Get medical advice/attention.
IF ON SKIN: Wash with plenty of soap and water.
Collect spillage.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Do not breathe dust/fume/gas/mist/vapours/spray.
Do not pierce or burn, even after use.
Do not spray on an open flame or other ignition source.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Pressurized container: may burst if heated.
Extremely flammable aerosol.
May be fatal if swallowed and enters airways.
Very toxic to aquatic life with long lasting effects.
Very toxic to aquatic life.
May cause damage to organs through prolonged or repeated exposure.
May cause respiratory irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Causes skin irritation.
P103, P501, P410+P412, P333+P313, P302+P352, P391, P310, P280, P273, P260, P251, P211, P210, P102, P101, H229, H222, H304, H410, H400, H373, H335, H319, H317, H315

What other SVB customers have to say

100% real reviews

5 customer reviews

4.8 (out of 5 ratings)
3 Stars
(0)
2 Stars
(0)
1 Stars
(0)
100% recommend SVB
  • Advantages
  • Colour (2)
  • Yield (theoretical) (2)
  • Price/performance ratio (1)
  • Processing (2)
  • Effect (1)
  • Drying time (1)
  • Disadvantages
  • Price/performance ratio (1)
  • Opinions
  • Place of use : Baltic Sea (1)
Good product, I will buy it again.
  • Advantages
  • Colour
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
  • Effect
  • Drying time
This item was rated via MyBoat on Aira boats - Aira 22.
Helmut H.
by Helmut H. Flag of Germany 1/10/2025 Verified purchase Variant: 41529
antifouling
Everything is good - fits - delivery top
  • Advantages
  • Colour
  • Yield (theoretical)
  • Processing
  • Disadvantages
  • Price/performance ratio
  • Opinions
  • Place of use : Baltic Sea
Frank F.
by Frank F. Flag of Germany 4/4/2024 Verified purchase Variant: 41527
Underwater painting
It was very easy to work with. Now I will observe how it behaves with the algae formation
  • Advantages
  • Colour
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
Images for this rating
Felix B.
by Felix B. Flag of Switzerland 5/31/2025 Verified purchase Variant: 41527 in use on a E. G. Van der Stadt & Partners - Van de Stadt 30
seajet 034 aluminum
I've been using Seajet 034 on the Baltic Sea for 10 years now.

I apply two coats every two years. In between, the boat stays in the water year-round. It works well and is easy to apply.
  • Advantages
  • Colour
  • Yield (theoretical)
  • Processing
  • Effect
  • Drying time
  • Opinions
  • Place of use : Baltic Sea

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

No questions asked yet. Be the first to ask a question!

E-mail Newsletter

Product news, offers & new guide videos. Stay up to date!

WhatsApp

New: Get news from SVB straight to your phone!

SEAJET EMPEROR A 034 Antifouling Spray
Colour Black